2SK1445,K1445: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Symbol	Min	Typ	Max	Unit	Description
Drain-Source Voltage	VDS	-	-	300	V	Maximum drain-to-source voltage
Gate-Source Voltage	VGS	-20	-	10	V	Maximum gate-to-source voltage
Drain Current	ID	-	8	15	A	Continuous drain current at 25°C
Gate Threshold Voltage	Vth	2	3	4	V	Gate threshold voltage
Transconductance	gm	20	30	40	S	Transconductance at ID = 5A, VGS = 10V
Input Capacitance	Ciss	-	1700	-	pF	Input capacitance at VDS = 25V, f = 1MHz
Output Capacitance	Coss	-	100	-	pF	Output capacitance at VDS = 25V, f = 1MHz
Reverse Transfer Capacitance	Crss	-	100	-	pF	Reverse transfer capacitance at VDS = 25V, f = 1MHz
Power Dissipation	PD	-	-	150	W	Maximum power dissipation (Note 1)
Junction Temperature	TJ	-55	-	150	°C	Operating junction temperature range
Storage Temperature	TSTG	-55	-	150	°C	Storage temperature range

Power Dissipation (PD): The maximum power dissipation is dependent on the thermal resistance and the ambient temperature. Ensure adequate heat sinking to maintain the junction temperature within the specified limits.

Handling:
- Handle the device with care to avoid damage to the leads and the body.
- Use proper ESD (Electrostatic Discharge) precautions to prevent damage to the gate oxide.
Mounting:
- Mount the device on a suitable heatsink to ensure efficient heat dissipation.
- Ensure that the heatsink is electrically isolated from the circuit if necessary.
Biasing:
- Apply the gate voltage carefully to avoid exceeding the maximum ratings.
- Use a series resistor between the gate and the driving circuit to limit gate current and protect the gate oxide.
Operation:
- Operate the device within the specified temperature and voltage ranges to ensure reliable performance.
- Monitor the junction temperature to avoid overheating.
Testing:
- When testing the device, use appropriate test equipment and methods to avoid damaging the device.
- Refer to the datasheet for specific test conditions and procedures.
Storage:
- Store the device in a dry, cool place away from direct sunlight and sources of heat.
- Avoid exposure to corrosive environments.

Electrical Safety: Ensure that all electrical connections are secure and insulated to prevent short circuits and electrical shocks.
Thermal Management: Proper thermal management is crucial to prevent overheating and ensure long-term reliability.
Environmental Considerations: Dispose of the device according to local regulations and environmental guidelines.

(For reference only)