MUR1520 U1520 200V15A TO-220: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Symbol	Value	Unit
Maximum Repetitive Peak Reverse Voltage	VRRM	200	V
Maximum RMS Voltage (Sinusoidal)	VRRMS	141	V
Maximum DC Blocking Voltage	VR	200	V
Maximum Average Rectified Forward Current	IF(AV)	15	A
Maximum RMS On-State Current (Sinusoidal)	IFSM	21	A
Non-Repetitive Peak Surge Current (8.3ms single half-sine wave, TJ = 25°C)	IFSM	120	A
Forward Voltage at IF = 15A, TJ = 25°C	VF	1.1	V
Reverse Recovery Time at IF = 15A, di/dt = 100A/μs, TJ = 25°C	trr	75	ns
Junction Temperature Range	TJ	-65 to 175	°C
Storage Temperature Range	TSTG	-65 to 150	°C
Operating Temperature Range	TOPR	-65 to 150	°C

Mounting:
- Ensure the device is mounted on a heatsink to maintain proper operating temperature.
- Use thermal compound between the device and the heatsink to improve heat transfer.
Electrical Connections:
- Connect the anode and cathode terminals correctly to avoid reverse polarity which can cause damage.
- Use wires with sufficient gauge to handle the maximum current rating.
Thermal Management:
- Monitor the junction temperature to ensure it does not exceed 175°C.
- Consider forced air cooling or a larger heatsink for high-power applications.
Surge Handling:
- The device can handle non-repetitive peak surge currents up to 120A. Ensure that surge conditions do not exceed this limit to prevent damage.
Storage:
- Store the device in a dry, cool place within the temperature range of -65°C to 150°C.
Handling:
- Handle the device with care to avoid mechanical stress.
- Use anti-static precautions to prevent damage from electrostatic discharge.
Testing:
- Before installing the device in a circuit, test it using a multimeter to ensure it is functioning correctly.
Compliance:
- Ensure the device complies with all relevant safety and regulatory standards for your application.

(For reference only)