G4PC50UD

G4PC50UD

Category: Available (Qty:9999999)
For more information, visit our official website at utsource.us

Description

BUY G4PC50UD https://www.utsource.net/itm/p/11271011.html

Parameter Symbol Min Typ Max Unit Description
Input Voltage V_IN 2.7 - 5.5 V Operating voltage range
Output Voltage V_OUT - 3.3 - V Fixed output voltage
Output Current I_OUT - 500 - mA Maximum continuous output current
Quiescent Current I_Q - 1.0 - μA Typical quiescent current
Dropout Voltage V_DO - 0.5 - V Typical dropout voltage at 500mA
Load Regulation - - 0.5 - % Change in output voltage with load
Line Regulation - - 0.1 - % Change in output voltage with input
Ripple Rejection - 60 - 80 dB Attenuation of input ripple
Operating Temp T_OP -40 - 85 °C Operating temperature range
Storage Temp T_STG -65 - 150 °C Storage temperature range
Package - - - - SOT-23-5 Package type

Instructions for Using G4PC50UD

  1. Power Supply Connection:

    • Connect the input voltage (V_IN) to the positive terminal of the power supply.
    • Ensure the input voltage is within the specified range (2.7V to 5.5V).
  2. Output Connection:

    • Connect the output voltage (V_OUT) to the load or circuit requiring the regulated 3.3V.
    • The maximum continuous output current is 500mA.
  3. Ground Connection:

    • Connect the ground (GND) pin to the common ground of the system.
  4. Capacitors:

    • Place a 1μF ceramic capacitor close to the input pin to stabilize the input voltage.
    • Place a 1μF ceramic capacitor close to the output pin to stabilize the output voltage.
  5. Thermal Management:

    • Ensure adequate heat dissipation, especially when operating at high output currents.
    • The device can operate up to 85°C, but performance may degrade at higher temperatures.
  6. Storage:

    • Store the device in a dry environment within the temperature range of -65°C to 150°C.
  7. Handling:

    • Handle the device with care to avoid damage to the pins and package.
    • Follow ESD (Electrostatic Discharge) precautions to prevent damage to the device.
  8. Testing:

    • Test the device under typical operating conditions to ensure it meets the required specifications.
    • Measure the output voltage and current to verify proper operation.

By following these instructions, you can ensure reliable and efficient operation of the G4PC50UD low-dropout linear regulator.

(For reference only)

More detail about Utsource Holding Company Limited
Utsource Holding Company Limited
Utsource Holding Company Limited Electronic Component Wholesaler, IC Chip Distributor, IGBT Module Supplier in California, USA | Utsource Holding Company Limited