Description
BUY RS1J https://www.utsource.net/itm/p/11278559.html
RS1J Fast Recovery Diodes 600V 1A 1.3V 250nS SMA/DO-214AC marking RS1J fast recovery rectifier
| Parameter |
Description |
Value |
| Part Number |
RS1J |
- |
| Type |
Surface Mount Resistor |
- |
| Resistance |
Nominal Resistance |
100Ω, 1kΩ, 10kΩ, etc. |
| Tolerance |
Resistance Tolerance |
±5% |
| Power Rating |
Maximum Power Dissipation |
0.125W (1/8W) |
| Operating Temp |
Operating Temperature Range |
-55°C to +125°C |
| Case Size |
Physical Dimensions |
0603 (1608 metric) |
| Material |
Resistor Body |
Ceramic |
| Termination |
End Caps |
Tin-Lead (SnPb) or Tin (Sn) |
| Compliance |
RoHS Compliance |
Yes |
| Packaging |
Tape and Reel |
- |
Instructions for Use
Handling:
- Handle the RS1J resistor with care to avoid damage.
- Use appropriate ESD (Electrostatic Discharge) protection when handling.
Soldering:
- Preheat the PCB to 100-120°C before soldering.
- Use a soldering iron with a temperature setting between 300-350°C.
- Apply solder to the pad first, then place the resistor and reflow the solder.
- Ensure the solder joints are smooth and free of voids.
Mounting:
- Place the resistor on the PCB according to the design layout.
- Ensure the resistor is aligned correctly and securely attached to the PCB.
Inspection:
- Visually inspect the solder joints for proper wetting and absence of shorts.
- Use a multimeter to verify the resistance value and ensure it matches the specified tolerance.
Storage:
- Store the resistors in a dry, cool environment to prevent moisture absorption.
- Keep the resistors in their original packaging until ready for use.
Testing:
- Test the assembled PCB to ensure the resistor is functioning correctly within the circuit.
- Check for any signs of overheating or failure during operation.
Disposal:
- Dispose of any defective or unused resistors in accordance with local environmental regulations.
(For reference only)
More detail about Utsource Holding Company Limited
