SM5817

BUY SM5817 https://www.utsource.net/itm/p/11278599.html
SM5817 SBD Schottky Barrier Diodes 20V 1A 750mV/0.75V DO-213AB rectifier low forward voltage

Instructions for Use

1. Power Supply Connection:

   • Connect the input voltage (VIN) to the power supply.
   • Ensure the input voltage is within the range of 2.7V to 5.5V.

2. Output Configuration:

   • The output voltage (VOUT) is fixed at 3.3V.
   • Connect the load to the output terminal.

3. Capacitors:

   • Place a 1μF ceramic capacitor close to the input pin (VIN) to stabilize the input voltage.
   • Place a 1μF ceramic capacitor close to the output pin (VOUT) to filter the output voltage.

4. Thermal Management:

   • Ensure adequate heat dissipation if operating at high current levels.
   • The device can operate up to 85°C ambient temperature.

5. PCB Layout:

   • Keep the traces short and wide to minimize inductance and resistance.
   • Use ground planes to improve thermal performance and reduce noise.

6. Storage:

   • Store the device in a dry environment to prevent moisture damage.
   • The storage temperature range is from -55°C to 150°C.

7. Handling:

   • Handle the device with care to avoid static discharge.
   • Follow ESD (Electrostatic Discharge) precautions during handling and installation.

8. Testing:

   • Before final assembly, test the device under typical operating conditions to ensure it meets the specified parameters.

9. Compliance:

   • Ensure that the design complies with relevant safety and regulatory standards.