Description
BUY RN5RT25AA-TR https://www.utsource.net/itm/p/11288754.html
RN5RT25AA-TR LDO Voltage Regulator 2.5V 300mV/0.3V With Enable Pin SOT-153/SOT23-5 marking AF Short-Circuit Protection Over-Temperature Protection
| Parameter |
Description |
Value |
| Part Number |
Full Part Number |
RN5RT25AA-TR |
| Series |
Series Name |
RN5RT |
| Type |
Component Type |
Resistor Network |
| Configuration |
Number of Resistors |
2 |
| Resistance |
Resistance Value (Ohms) |
25kΩ |
| Tolerance |
Tolerance (%) |
±1% |
| Power Rating |
Power Rating (Watts) |
0.1W (100mW) per resistor |
| Operating Temperature |
Temperature Range |
-55°C to +125°C |
| Case Size |
Package Size |
0805 (2012 Metric) |
| Termination |
Termination Style |
SMD (Surface Mount Device) |
| Material |
Body Material |
Ceramic |
| Compliance |
RoHS Compliance |
Yes |
| Lead-Free |
Lead-Free |
Yes |
| Moisture Sensitivity Level |
MSL |
3 (168 hours) |
Instructions for Use:
- Handling: Handle with care to avoid damage to the component. Use appropriate ESD (Electrostatic Discharge) protection.
- Soldering: Use a soldering iron with a temperature setting between 260°C and 300°C. Ensure that the soldering process does not exceed 10 seconds per joint.
- Placement: Place the component on the PCB (Printed Circuit Board) according to the design layout. Ensure that the correct orientation is maintained if specified.
- Inspection: After soldering, inspect the component for proper alignment and solder joints. Ensure there are no shorts or open circuits.
- Storage: Store in a dry environment with controlled humidity to prevent moisture damage. Follow the MSL (Moisture Sensitivity Level) guidelines for baking if necessary.
- Testing: Perform functional testing of the circuit to ensure the resistor network is operating within specifications.
(For reference only)
More detail about Utsource Holding Company Limited
