2SC2625 C2625: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Symbol	Min	Typical	Max	Unit	Conditions
Collector-Emitter Voltage	V_CE	-	-	40	V
Collector-Base Voltage	V_CB	-	-	40	V
Emitter-Base Voltage	V_EB	-	-	6	V
Collector Current	I_C	-	100	-	mA
Base Current	I_B	-	5	-	mA
DC Current Gain	h_FE	30	100	300	-	I_C = 10 mA, V_CE = 5 V
Transition Frequency	f_T	-	150	-	MHz
Storage Temperature	T_STG	-55	-	150	°C
Operating Temperature	T_OP	-55	-	150	°C
Power Dissipation	P_T	-	-	625	mW	T_A = 25°C

Handling:
- Handle the 2SC2625 with care to avoid static damage.
- Use appropriate ESD (Electrostatic Discharge) protection when handling the device.
Mounting:
- Ensure proper alignment of the leads during soldering.
- Avoid excessive heat during soldering; use a temperature-controlled soldering iron.
- Soldering time should not exceed 3 seconds per lead at a maximum temperature of 260°C.
Biasing:
- Ensure that the base-emitter voltage (V_BE) is within the specified limits to avoid damage.
- Use appropriate biasing circuits to maintain stable operation.
Power Dissipation:
- Do not exceed the maximum power dissipation (P_T) to prevent overheating and potential failure.
- Consider using a heatsink if operating near the maximum power dissipation limit.
Storage:
- Store the device in a dry, cool place away from direct sunlight.
- Keep the device in its original packaging until ready for use to protect against moisture and static.
Testing:
- Use a multimeter or transistor tester to verify the parameters before installation.
- Test the device under controlled conditions to ensure it meets the specified performance criteria.
Applications:
- The 2SC2625 is suitable for a wide range of applications including audio amplifiers, switching circuits, and general-purpose amplification.

By following these guidelines, you can ensure optimal performance and longevity of the 2SC2625 transistor.

(For reference only)