Description
BUY MB1S 50MIL https://www.utsource.net/itm/p/11535622.html
| Parameter |
Value |
Unit |
| Package Type |
DIP-8 |
- |
| Pin Pitch |
50 |
mil |
| Operating Voltage |
2.7 to 5.5 |
V |
| Operating Current |
10 |
mA |
| Output Type |
Open Collector |
- |
| Maximum Load |
30 |
mA |
| Operating Temp. |
-40 to +85 |
°C |
| Storage Temp. |
-65 to +150 |
°C |
| Response Time |
10 |
ms |
Instructions:
Power Supply:
- Connect the power supply to the VCC and GND pins.
- Ensure the operating voltage is within the range of 2.7V to 5.5V.
Signal Input:
- Apply the input signal to the IN pin.
- The input signal should be compatible with the operating voltage.
Output Configuration:
- Connect the load between the OUT pin and the positive supply.
- The OUT pin is an open collector, so a pull-up resistor is required to ensure proper operation.
Temperature Considerations:
- Ensure the operating temperature remains between -40°C and +85°C.
- Store the device in an environment where the temperature does not exceed -65°C to +150°C.
Handling:
- Handle the component with care to avoid damage.
- Use appropriate ESD protection when handling the device.
Mounting:
- Solder the component to the PCB using standard soldering techniques.
- Ensure proper alignment and orientation of the component on the PCB.
Testing:
- After mounting, test the functionality by applying the input signal and verifying the output response.
- Check for any shorts or open circuits.
(For reference only)
More detail about Utsource Holding Company Limited
