TLP250(F): Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Supply Voltage	V_CC	4.5	5.0	5.5	V	-
Input Forward Voltage	V_IF	-	1.2	-	V	I_F = 10 mA
Input Current	I_F	-	10	-	mA	V_IF = 1.2 V
Output Saturation Voltage	V_CE(sat)	-	0.3	-	V	I_C = 100 mA, V_CC = 5 V
Output Leakage Current	I_CEO	-	10	-	μA	V_CE = 5 V, I_F = 0 mA
Propagation Delay Time	t_pd	-	100	-	ns	V_CC = 5 V, I_F = 10 mA, R_L = 300 Ω
Rise Time	t_r	-	50	-	ns	V_CC = 5 V, I_F = 10 mA, R_L = 300 Ω
Fall Time	t_f	-	50	-	ns	V_CC = 5 V, I_F = 10 mA, R_L = 300 Ω
Operating Temperature Range	T_op	-40	-	85	°C	-

Power Supply:
- Ensure the supply voltage (V_CC) is within the range of 4.5 to 5.5 V.
Input Signal:
- Apply the input current (I_F) to the input pin. The typical value is 10 mA.
- The input forward voltage (V_IF) should be around 1.2 V when I_F = 10 mA.
Output Configuration:
- Connect the load resistor (R_L) between the output pin and ground.
- The output saturation voltage (V_CE(sat)) should be less than 0.3 V when the output current (I_C) is 100 mA and V_CC is 5 V.
Timing Parameters:
- The propagation delay time (t_pd) is typically 100 ns.
- The rise time (t_r) and fall time (t_f) are both typically 50 ns.
Temperature Considerations:
- Operate the device within the temperature range of -40°C to 85°C.
Handling Precautions:
- Handle the device with care to avoid static damage.
- Ensure proper heat dissipation if operating at high currents or temperatures.
Storage:
- Store the device in a dry, cool place to prevent moisture damage.

By following these parameters and instructions, you can ensure reliable operation of the TLP250(F) optocoupler.

(For reference only)