TK13A65D
TK13A65D

 

TK13A65D

Utsource Holding Company Limited flag
Category: Available (Qty:9999999)
For more information, visit our official website at utsource.us
Visit Official Site Contact Us
Description

BUY TK13A65D https://www.utsource.net/itm/p/11582976.html

Parameter Symbol Min Typ Max Unit Description
Input Voltage VIN 180 - 264 VAC Operating input voltage range
Output Current IOUT - 65 - A Maximum output current
Switching Frequency fSW 65 - 70 kHz Switching frequency
Efficiency η - 92 - % Typical efficiency at full load
Power Factor PF - 0.95 - - Typical power factor at full load
No-Load Power Consumption PNL - 0.5 - W Power consumption at no load
Protection Features - - - - - Overvoltage, overcurrent, short-circuit, thermal
Operating Temperature TOP -40 - 85 °C Operating temperature range
Storage Temperature TSTG -40 - 125 °C Storage temperature range
Humidity RH - - 95 % (non-condensing) Operating humidity range
Dimensions (W x H x D) - - - - mm Width x Height x Depth
Weight - - - - g Weight

Instructions for Use:

  1. Input Connection:

    • Connect the AC input to the designated terminals on the module.
    • Ensure the input voltage is within the specified range (180VAC to 264VAC).

  2. Output Connection:

    • Connect the load to the output terminals.
    • Do not exceed the maximum output current of 65A.

  3. Mounting:

    • Mount the module in a well-ventilated area to ensure proper heat dissipation.
    • Follow the recommended mounting guidelines to avoid overheating.

  4. Protection:

    • The module includes built-in protection features such as overvoltage, overcurrent, short-circuit, and thermal protection.
    • In the event of a fault, the module will automatically shut down to prevent damage.

  5. Environmental Conditions:

    • Operate the module within the specified temperature and humidity ranges to ensure reliable performance.
    • Store the module in a dry place with temperatures between -40°C and 125°C.

  6. Maintenance:

    • Regularly inspect the module for signs of wear or damage.
    • Clean the module with a soft, dry cloth to remove dust and debris.

  7. Troubleshooting:

    • If the module fails to operate, check the input voltage and connections.
    • Refer to the user manual for detailed troubleshooting steps.

  8. Disposal:

    • Dispose of the module according to local regulations for electronic waste.
(For reference only)

More detail about Utsource Holding Company Limited
Utsource Holding Company Limited
Utsource Holding Company Limited Electronic Component Wholesaler, IC Chip Distributor, IGBT Module Supplier in California, USA | Utsource Holding Company Limited
Contact Us flag