TK100E08N1 K100E08N1 100A 80V TO-220: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Symbol	Value	Unit
Maximum Forward Current	IF	100	A
Maximum Reverse Voltage	VR	80	V
Peak Forward Surge Current	IFSM	600	A
Total Power Dissipation	Ptot	150	W
Junction Temperature	Tj	-55 to +175	°C
Storage Temperature	Tstg	-65 to +150	°C
Thermal Resistance, Junction to Case	RthJC	0.4	°C/W
Thermal Resistance, Junction to Ambient	RthJA	35	°C/W
Forward Voltage at Rated Current	VF@IF	1.9	V
Reverse Recovery Time	trr	120	ns

Mounting:
- Ensure the device is mounted on a heatsink with adequate thermal conductivity.
- Use a thermal interface material (TIM) to enhance heat dissipation between the device and the heatsink.
Electrical Connections:
- Connect the anode and cathode terminals correctly to avoid reverse polarity, which can lead to device failure.
- Use appropriately sized wires to handle the maximum current rating.
Thermal Management:
- Monitor the junction temperature to ensure it does not exceed the maximum allowable temperature of 175°C.
- Ensure adequate airflow or forced cooling if operating near the maximum power dissipation.
Surge Handling:
- The device can handle peak forward surge currents up to 600A for short durations. Ensure that surge conditions do not exceed this limit.
Storage:
- Store the device in a dry, cool environment within the specified storage temperature range of -65°C to +150°C.
Handling:
- Handle the device with care to avoid mechanical damage.
- Follow ESD (Electrostatic Discharge) precautions to prevent damage from static electricity.
Testing:
- Before installing the device in a circuit, perform initial testing to verify its functionality and parameters.
Compliance:
- Ensure that the device meets all relevant safety and regulatory standards for your application.

(For reference only)