Diodes
1.5KE220A
1.5KE220A

 

1.5KE220A

Utsource Holding Company Limited flag
Category: Diodes Available (Qty:9999999)
For more information, visit our official website at utsource.us
Visit Official Site Contact Us
Description

BUY 1.5KE220A https://www.utsource.net/itm/p/12541418.html

Parameter Symbol Value Unit
Maximum Repetitive Peak Reverse Voltage VRRM 220 V
Maximum DC Working Voltage VRWM 160 V
Maximum Average Forward Rectified Current IFTM 0.5 A
Maximum RMS Forward Current (8.3 ms half sine-wave) IRMS 0.625 A
Maximum Non-Repetitive Peak Surge Current (8.3 ms one half cycle of a 60 Hz sine wave) Ipp 47 A
Junction Operating Temperature Range TJ -55 to 150 °C
Storage Temperature Range TSTG -55 to 150 °C

Instructions for Use:

  1. Voltage Handling: Ensure that the reverse voltage applied does not exceed the maximum repetitive peak reverse voltage (VRRM) of 220V to prevent damage.
  2. Current Ratings: Operate within the specified average forward rectified current (IFTM) and RMS forward current (IRMS) limits to avoid overheating.
  3. Surge Currents: The device can handle non-repetitive peak surge currents up to 47A, but this should not be exceeded as it can lead to premature failure.
  4. Temperature Considerations: The operating junction temperature (TJ) should remain between -55°C and 150°C. Exceeding these limits can cause malfunction or damage.
  5. Storage Conditions: When storing the component, ensure temperatures are within the storage range (-55°C to 150°C).
  6. Mounting: Proper mounting is crucial to ensure adequate heat dissipation, especially if operating near maximum current ratings.
(For reference only)

More detail about Utsource Holding Company Limited
Utsource Holding Company Limited
Utsource Holding Company Limited Electronic Component Wholesaler, IC Chip Distributor, IGBT Module Supplier in California, USA | Utsource Holding Company Limited
Contact Us flag