Description
BUY SC802-06-TE12RA https://www.utsource.net/itm/p/12597211.html
| Parameter |
Value/Description |
| Component Type |
Surface Mount Inductor |
| Part Number |
SC802-06-TE12RA |
| Manufacturer |
Sumida Corporation |
| Series |
SC802 |
| Inductance (L) |
6.0 μH ± 20% |
| DC Resistance (Rdc) |
0.035 Ω max |
| Saturation Current |
1.2 A (at 30% inductance drop) |
| Rated Current |
1.2 A (at 40°C temperature rise) |
| Operating Temperature |
-40°C to +125°C |
| Frequency Range |
Up to 100 MHz |
| Shielding |
Shielded |
| Case Size |
0805 (2.0 x 2.5 mm) |
| Height |
1.2 mm max |
| Tolerance |
±20% |
| RoHS Compliance |
Yes |
| Package Type |
Tape & Reel |
Instructions for Use:
Mounting:
- Place the component on the PCB using standard SMT placement equipment.
- Ensure that the component is aligned correctly with the pads.
Soldering:
- Use a reflow soldering process with a peak temperature of 260°C.
- Avoid overheating as it can damage the component.
- Ensure good solder joints to maintain electrical performance and mechanical stability.
Handling:
- Handle the component with care to avoid mechanical stress or damage.
- Store in a dry environment to prevent moisture absorption.
Testing:
- Measure the inductance and DC resistance using a suitable LCR meter.
- Verify that the inductance is within the specified tolerance range.
- Check the saturation current by applying the rated current and measuring the inductance drop.
Design Considerations:
- Ensure adequate clearance around the component to allow for heat dissipation.
- Consider the operating temperature range and environmental conditions when designing the circuit.
- Use the component in applications where a compact, high-performance inductor is required, such as power supplies, filters, and signal conditioning circuits.
(For reference only)
More detail about Utsource Holding Company Limited
