KBP206

KBP206

Category: Available (Qty:9999999)
For more information, visit our official website at utsource.us

Description

BUY KBP206 https://www.utsource.net/itm/p/1243249.html
2.0A BRIDGE RECTIFIER

Parameter Description Value
Part Number Component Identifier KBP206
Type Component Type Bridge Rectifier
Package Encapsulation Type DO-214AC (SMB)
Forward Voltage (Vf) Maximum forward voltage drop across the diode when conducting 1.0V (Max) at 6A, 25°C
Reverse Voltage (Vr) Maximum reverse voltage that can be applied without breakdown 600V (Max)
Average Forward Current (If(AV)) Continuous average forward current 6A (Max) at Tc = 75°C
Peak Forward Surge Current (Ifsm) Non-repetitive peak forward surge current 300A (Max) for 8.3ms sine-wave half-cycle, Tj = 25°C
Operating Temperature Range (Tj) Junction temperature range -65°C to +175°C
Storage Temperature Range (Ts) Temperature range for storage -65°C to +150°C
Thermal Resistance (Rth(j-c)) Thermal resistance from junction to case 20°C/W
Leakage Current (Ir) Reverse leakage current at maximum reverse voltage 5μA (Max) at Vr = 600V, Tj = 25°C
Capacitance (Cj) Junction capacitance 100pF (Typ) at Vr = 400V, f = 1MHz

Instructions for Use:

  1. Mounting:

    • Ensure proper heat dissipation by mounting the KBP206 on a heatsink if operating at high currents or temperatures.
    • Use a thermal compound between the component and the heatsink to improve thermal conductivity.
  2. Electrical Connections:

    • Connect the input AC voltage to the two input terminals (1 and 3).
    • Connect the output DC voltage to the two output terminals (2 and 4).
  3. Handling:

    • Handle the component with care to avoid mechanical stress or damage.
    • Avoid exposing the component to excessive humidity or corrosive environments.
  4. Storage:

    • Store the component in a dry, cool place within the specified storage temperature range.
  5. Testing:

    • Before installation, test the component for proper functionality using a multimeter or other suitable testing equipment.
    • Ensure that the forward and reverse voltages are within the specified limits.
  6. Derating:

    • For reliable operation, derate the average forward current based on the ambient temperature. Refer to the derating curve provided in the datasheet.
  7. Compliance:

    • Ensure that the component is used in compliance with all relevant safety and regulatory standards.
(For reference only)

More detail about Utsource Holding Company Limited
Utsource Holding Company Limited
Utsource Holding Company Limited Electronic Component Wholesaler, IC Chip Distributor, IGBT Module Supplier in California, USA | Utsource Holding Company Limited