2W04G

BUY 2W04G https://www.utsource.net/itm/p/4055250.html
SINTERED GLASS PASSIVATED BRIDGE RECTIFIER

Instructions for Use:

1. Mounting:

   • Place the resistor on the PCB according to the design layout.
   • Ensure that the resistor is aligned correctly with the pads.

2. Soldering:

   • Preheat the PCB to the recommended temperature.
   • Apply solder to the pads and ensure a good connection.
   • Avoid excessive heat to prevent damage to the component or PCB.

3. Inspection:

   • Visually inspect the solder joints for proper wetting and absence of voids or bridges.
   • Use a multimeter to verify the resistance value and ensure it falls within the specified tolerance range.

4. Storage:

   • Store in a dry, cool place to prevent moisture absorption.
   • Handle with care to avoid mechanical stress or damage.

5. Handling:

   • Use appropriate ESD (Electrostatic Discharge) protection when handling the component to prevent damage from static electricity.

6. Testing:

   • Test the circuit to ensure the resistor is functioning correctly and the power dissipation is within safe limits.