Upgrade your commercial, retail, and architectural lighting systems with the next-generation LEDVANCE LVED SUP 30/220-240/700 DIM G3. This premium Generation 3 constant current LED driver is engineered specifically for modern smart building infrastructures across Malaysia, offering unmatched versatility, energy efficiency, and precise dimming control. Designed to meet the stringent technical demands of local mechanical and electrical (M&E) consultants and electrical contractors, this driver seamlessly bridges high-end European lighting engineering with practical, tropicalized durability.
The standout feature of the LEDVANCE LED SUP G3 series is its flexible current selector capability. This single unit replaces multiple single-output drivers by offering broad current range coverage. Users can select output profiles ranging from 150-350mA, 400-650mA, up to a maximum of 700mA. Depending on the current configuration, the voltage dynamically scales from 2.5VDC up to 49VDC, making it highly adaptable for various LED downlights, linear profiles, and panel lights.
Operating at a peak efficiency of 90% (at 650mA full load, 230Vac), the driver significantly minimizes heat dissipation and lowers overall electricity overheads. This helps corporate buildings achieve better green building ratings, such as Malaysia's Green Building Index (GBI) certification.
Fully certified with DALI-2 compliance (covering IEC 62386-101, 102, 207, 251, 252, and 253 standards), this driver integrates effortlessly into centralized Building Management Systems (BMS) and intelligent lighting control platforms like KNX or Helvar. It also features integrated Push Dimming with a Corridor Function, allowing for budget-friendly, standalone automated dimming via standard retractive wall switches.
The driver utilizes a hybrid dimming methodology to guarantee flicker-free visual comfort:
1% to 12.5% Dimming Depth: Employs precise Pulse Width Modulation (PWM).
12.5% to 100% Dimming Range: Utilizes Amplitude Modulation (AM) for smooth, continuous analog fading without visible stepping.
With a minimal dimming depth of 3mA at lower ranges and 1% at higher ranges, this driver supports ultra-low nighttime ambient lighting setups.
Voltage fluctuations can pose a challenge in industrial areas across Malaysia. LEDVANCE addresses this with an input range of 198-264VAC (and 176-280VDC for emergency backup systems), alongside temporary protection against extreme overvoltages up to 300VAC for up to one hour.
Visual comfort is enhanced by a low output current ripple ($\le120\text{Hz}$) of $\pm3\%$, an Stroboscopic Visibility Measure (SVM $\le0.4$), and a Perceptibility Short-Term indicator (Pst $\le1$) at full load. This prevents digital camera flicker and reduces eye strain in corporate offices, universities, and hospitals.
Safety and system longevity are prioritized through hardware-level protection mechanisms:
Overload & Overvoltage Protection: Features a latch-off mechanism (103-120% threshold, 60VDC max) to safeguard downstream LED modules from sudden power surges.
Short-Circuit Protection: Instant latch-off safeguard in the event of wiring faults.
Over-Temperature Protection: Intelligent Auto Resume function safely throttles and restores operation once safe thermal limits are reached, eliminating manual maintenance visits.
Surge Capability: Provides 1KV line-to-neutral (L-N) protection, ensuring resilience against grid switching spikes.
| Main Category | Parameter | Specification / Value | ||
|---|---|---|---|---|
| Output | Constant Current (mA) | 150-350mA | 400-650mA | 700mA |
| Voltage Range (VDC) | 9-49VDC | 2.5-45VDC | 2.5-42VDC | |
| Unload voltage Max. (VDC) | 60VDC | |||
| Current Accuracy | ±5% | |||
| ²Output current ripple (≤120Hz) | ±3% | |||
| SVM | ≤0.4 @ Full Load | |||
| Pst | ≤1 @ Full Load | |||
| Efficiency (Typ.) | 90% @ 650mA, Full Load, 230Vac | |||
| EOFI | 100% | |||
| Input | Rated input voltage (VAC) | 220-240VAC | ||
| Range of input voltage (VAC) | 198-264VAC | |||
| Maximum voltage | 300VAC @ 1 h maximum, unit might not operate in this abnormal condition | |||
| Range of input voltage (VDC) | 176-280VDC | |||
| Frequency (Hz) | 0/50/60 Hz | |||
| Displacement Factor | ≥0.9 @ full load, 230Vac | |||
| Power Factor | >0.95 @ full load, 230Vac | |||
| Input Current max | 0.20A max | |||
| Start-up time | < 0.8S | |||
| Switch over time (AC/DC mode) | < 0.6S | |||
| Standby Power | ≤0.3W, @ 220Vac | |||
| Network Standby Power | ≤0.3W, @ 220Vac | |||
| THD (Typ.) | < 10% @ full load, 230Vac | |||
| Dimming | Dimming | YES | ||
| Dimming mode | DALI-2 (IEC 62386-101, 102, 207, 251, 252, 253) & Push Dimming (Corridor Function) | |||
| Dimming depth | 3mA @ 150-300mA, 1% @ 350-700mA | |||
| Dimming current range | 1~100% | |||
| Dimming method | 1%-12.5% @ PWM dimming, 12.5%-100% @ AM dimming | |||
| Protection | Over Load Protection | 103-120%, YES / Latch off | ||
| Over Voltage Protection | 60VDC, YES / Latch off | |||
| Short circuit Protection | YES / Latch off | |||
| Over Temperature Protection | YES / Auto Resume | |||
| Capability | Surge capability (L-N) | 1KV | ||
| Environment | Operating Temperature | -20°C ~ +45° | ||
Q1: What is the maximum wattage of the LEDVANCE LVED SUP 30/220-240/700 DIM G3? A1: The maximum output wattage of this LEDVANCE Generation 3 LED driver is approximately 30W, depending on the chosen constant current selection (up to 700mA) and the corresponding forward voltage.
Q2: Does this LEDVANCE G3 driver support DALI-2 protocols in Malaysia? A2: Yes, it is fully certified under DALI-2 standards, including IEC 62386-101, 102, 207, 251, 252, and 253, ensuring compatibility with modern smart office building management systems.
Q3: What is the current selector range for the LVED SUP 30 DALI driver? A3: The current selector can be configured across multiple ranges: 150-350mA, 400-650mA, and a fixed 700mA output to match different LED module requirements.
Q4: Can I use this LEDVANCE driver for emergency lighting systems (DC input)? A4: Yes, the driver accepts a DC voltage range of 176-280VDC, making it suitable for central battery backup and emergency lighting systems.
Q5: What dimming methods does the LEDVANCE LVED SUP 30 use? A5: It uses a combined hybrid dimming method: PWM (Pulse Width Modulation) from 1% to 12.5% for precise low-level control, and AM (Amplitude Modulation) from 12.5% to 100% for flicker-free high brightness.
Q6: What is the power factor of this LEDVANCE 30W driver at full load? A6: The driver features a high power factor of $>0.95$ and a displacement factor of $\ge0.9$ when operating at full load with a 230Vac input.
Q7: How does the over-temperature protection work on this LED driver? A7: Unlike its overload protection which latches off, the over-temperature protection features an Auto Resume mechanism that safely restores driver operation once temperatures drop back to normal.
Q8: Does the LEDVANCE LVED SUP 30 support push dimming for corridor lighting? A8: Yes, it includes built-in Push Dimming capabilities supporting a Corridor Function, allowing automated dimming via standard momentary switches without a dedicated DALI controller.
Q9: What is the standby power consumption of this DALI-2 driver? A9: The driver is highly energy efficient, maintaining a standby power consumption and network standby power consumption of $\le0.3\text$ at 220Vac.
Q10: What is the operating temperature range suitable for Malaysian installations? A10: The driver is rated to operate reliably within an ambient temperature range of -20°C to +45°C, making it well-suited for indoor ceiling voids in tropical climates.
更多 E S L Lighting (M) Sdn Bhd 相关资料
Malaysia
