In the 2026 Malaysian regulatory landscape, Moisture Management has transitioned from a maintenance task to a high-stakes statutory requirement. Under the DOSH (JKKP) 2026 Industry Code of Practice on Indoor Air Quality, uncontrolled moisture within an AHU is classified as a "Biological Hazard Trigger." Specifically, standing water and "The Sponge Effect" in legacy insulation are recognized as the primary contributors to fungal proliferation and airborne spore counts.
At EKG (Malaysia) SDN BHD, we provide structural moisture remediation that transitions your AHU Box into a "Zero-Stagnation" enclosure, ensuring your facility passes mandatory audits for Building Energy Intensity (BEI) and Indoor Environmental Quality (IEQ).
Moisture management is not just about drainage; it is about maintaining the AHU Moisture Barrier. In Kuala Lumpur’s 90%+ humidity, any structural breach allows moisture to migrate into the casing insulation.
Vapor Seal Restoration: We utilize high-tensile, antimicrobial mastics to seal panel seams and frame junctions. This prevents humid plant room air from being drawn into the cold internal plenum, eliminating internal "sweat."
Thermal Decoupling (TB2 Standards): We install non-conductive polyamide breaks to separate the inner and outer skins of the AHU Frame. This prevents thermal bridging, ensuring the external casing temperature stays above the dew point.
Axial Plane Realignment: To prevent pooling, we utilize laser-guided leveling to reset the AHU Base Frame. This ensures a perfect 1:50 slope toward the drain, eliminating the stagnant zones where bio-films thrive.
Compliance with 2026 standards requires empirical proof that your moisture management systems are active and sterile.
Microbial Limit Compliance: DOSH 2026 mandates that total fungal counts remain below 1000 CFU/m³. Our Silver-Ion (Ag+) passivation of the drain pan and internal surfaces disrupts pathogen metabolism, ensuring you meet this benchmark.
SFP Efficiency (EECA 2024): Saturated insulation increases the thermal mass and air resistance of the unit. By keeping the insulation dry, we ensure your Specific Fan Power (SFP) stays within the statutory 1.6 kW/m³/s limit.
Life Safety (BOMBA 2026): All moisture-proofing materials, including waterproof membranes and closed-cell cores, are certified Class 0 (BS 476 Part 6 & 7) for zero flame spread and minimal smoke toxicity.
We follow a forensic mechanical workflow to ensure your moisture management is both audit-ready and durable.
| Stage | Engineering Action | Compliance Outcome |
| I: Forensic Moisture Audit | FLIR thermal imaging and ultrasonic thickness testing of the pan. | Identifies hidden "Cold Spots," casing leaks, and structural thinning. |
| II: Mechanical Realignment | Controlled jacking and installation of G90 structural shims. | Restores the designed drainage pitch and neutralizes frame sagging. |
| III: Bio-Security Upgrade | Application of Silver-Ion (Ag+) antimicrobial structural liners. | Re-establishes a seamless, 100% waterproof, and biologically inert basin. |
| IV: T&C Validation | Post-repair flood testing and SFP re-validation. | Provides the certified technical dossier required for your Registered Energy Manager (REM). |
To ensure the unit survives the 2026 audit cycle and beyond, we eliminate the primary moisture reservoir: legacy fiberglass.
Fiber-Free Closed-Cell Insulation: We replace moisture-wicking materials with high-density, non-porous insulation. This ensures that even if a seal is momentarily breached, the insulation cannot act as a "Sponge."
Hydrophobic Surface Physics: Our antimicrobial liners reduce the surface tension of the internal plenum, causing condensate to "bead" and roll toward the drain faster, effectively increasing the self-cleaning capacity.
Seismic-Rated Failsafes: We integrate Automatic High-Level Float Switches that are anchored with seismic-rated brackets, ensuring an automated shutdown if the drainage path is compromised.
Technical Integrity: We are mechanical and T&C specialists. We focus on the thermodynamic and biological stabilization of your assets through precision engineering.
Audit-Ready Reporting: Following every project, we provide a DOSH 2026 Moisture Compliance Report, essential for your annual building audits and ESG reporting.
GITA Sustainability: Moisture management and IAQ modernizations are recognized "Green" interventions, qualifying for the 100% Green Investment Tax Allowance (GITA).
Is your AHU inventory showing signs of casing sweat, rust, or foul odors?
Contact EKG (Malaysia) SDN BHD today for a professional DOSH 2026 Compliant Moisture Management Audit.
更多 EKG M & E SDN BHD 相关资料
Malaysia
