| Model No. |
MTH-080 |
|
| Inner chamber size(cm) |
40×50×40 |
|
| Temperature range |
-70℃，-60℃, -40℃, -20℃, 0℃~150℃，other temperature can be customized |
|
| Humidity range |
20%RH～98%RH(10%RH～98%RH 5%RH～98%RH)can be customized) |
|
| Temp.humi.fluctuation |
±0.3℃；±0.5%RH |
|
| Temp.humi.uniformity |
±2℃；±3%RH (empty load, 30 minutes after stablization) |
|
| Temp.humi.resolution |
0.01℃；0.1%RH |
|
| Heating&cooling time ℃/min |
Heating rate 3℃/min, cooling rate 1℃/min(average rate, non-linear change) |
|
| Exterior chamber material |
Cold-rolled plate + Powder coating |
|
| Interior chamber material |
SUS#304 Stainless steel |
|
| Insulation material |
PU |
|
| Circulation system |
Centrifugal fan air circulation system |
|
| Heating system |
SUS# Stainless steel high-speed heater |
|
| Humidification system |
Electrothermal steam humidification |
|
| Dehumidifying |
ADP critical dew point cooling / dehumidifying method |
|
| Refrigeration system |
Compressor + Finned evaporator + Air (Water) cooled condenser |
|
| Controlling system |
Touch screen controller+SSR+PID |
|
| Other components |
Vacuum glass observation window |
|
| Test hole (50mm) |
|
| Control status indicator |
|
| Interior light |
|
| Loading shelf (2pcs, height adjustable) |
|
| Safety protection device |
Overheat protection circuit breaker |
|
| Humidification system overheat protection |
|
| Compressor overload protection |
|
| Control system overload protection |
|
| Overload indicator |
|
| Phase sequence protection |
|
| Water shortage protection |
|
| High voltage and low voltage protection |
|
| Over-temperature protection |
|
| Water supply delay protection |
|
| Fan overcurrent protection |
|
| Power supply |
AC 1Ψ 220V 50Hz |
|
| Customization service |
Non-standard or special requirements can be customized. |
|
| |
Malaysia
