Nippon Paint FloorSports 1K Epoxy Hybrid is a high-performance, water-based single-component epoxy hybrid coating specifically designed for sports courts and recreational floor surfaces. It combines the toughness of epoxy technology with the flexibility and weather resistance required for outdoor and indoor environments. This coating provides a slip-resistant, matte finish that is highly durable against abrasion, UV radiation, and heavy foot traffic. It is an eco-friendly formulation with low VOC and low odor, making it safe for both applicators and users. Its excellent adhesion properties ensure a long-lasting, vibrant finish on concrete and asphalt substrates, commonly used for basketball courts, tennis courts, badminton courts, and multipurpose halls.
Paint Type: Water-based (Single Component Epoxy Hybrid)
Finishing: Matt
Binder: Epoxy Hybrid Emulsion
Thinning: Ready for use. If necessary, dilute with maximum 5% clean water.
Touch Dry: 30 minutes (depending on temperature and humidity)
Hard Dry: 2 hours
Recoating Interval: Minimum 2 hours
Theoretical Coverage: 10 – 12 m² per litre per coat
No. of Coats: 2 coats
Shelf Life: Up to 24 months in a tightly sealed container
Application Method: Apply using a Brush, Roller, or Squeegee.
Dilution: Stir thoroughly before use. The product is ready to use, but a maximum of 5% water can be added for better workability on porous surfaces.
Cleaning: Clean all painting equipment with clean water immediately after use.
Note: Do not apply when the surface temperature is below 10°C or when rain is imminent for outdoor applications.
Primer (1 Coat): Ultra Sealer III or 5100 Wall Sealer (for concrete substrates).
Topcoat (2 Coats): FloorSports 1K Epoxy Hybrid.
Line Marking: FloorSports 1K Epoxy Hybrid in contrasting colors (e.g., White or Yellow).
General Cleaning: Surface must be dry, clean, and free from grease, oil, dust, and loose matter.
Concrete Surfaces: New concrete must be allowed to cure for at least 28 days. Ensure the moisture content is below 6% (using a Sika or protimeter) and surface pH is below 9.
Defect Removal: Remove all laitance and loose material by captive shot blasting, grinding, or wire brushing.
Repair: Fill cracks and potholes with suitable epoxy-based fillers or cementitious repair mortars before coating.
Existing Paint: If applying over existing paint, ensure the old coating is stable and well-adhered. Lightly sand the surface to provide a mechanical key for better adhesion.
Malaysia
