EP-105M/0 3.5MN PLUG -BLACK

3.5mm Mono TS Plug Solder-Type Audio Connector with Strain Relief

This professional-grade 3.5mm Mono (TS) Plug is designed for DIY audio repairs, custom cable assembly, and industrial signaling applications. Featuring a durable, lightweight black polymer housing and an integrated flexible strain relief spring, it ensures a reliable connection for mono audio devices, trigger cables, and communication equipment.

Key Product Features

• Mono TS Architecture: Features a standard Tip-Sleeve (TS) configuration, perfect for mono signals, 12V triggers, and unbalanced microphone inputs.

• Integrated Spring Strain Relief: The rear of the connector is equipped with a flexible spiral spring that prevents sharp cable bends, significantly extending the life of your custom cables.

• Impact-Resistant Black Housing: The textured black polymer shell provides a non-slip grip and protects internal solder joints from mechanical stress and environmental wear.

• Solder-Terminal Design: Designed with accessible internal solder tabs for the tip and sleeve, allowing for high-integrity electrical connections with standard 2-conductor wire.

• Nickel-Plated Tip: The precision-machined 3.5mm jack is nickel-plated to resist oxidation and maintain consistent conductivity over hundreds of plug-in cycles.

Technical Specifications

• Connector Type: 3.5mm (1/8 inch) Mono TS Male.

• Audio Channel: Mono (Single Channel).

• Shell Material: Durable ABS/Polymer Housing.

• Contact Material: Nickel-Plated Brass.

• Assembly Type: Solder-on.

• Color: Sleek Matte Black.

Top 3 Customer Questions & Concerns ‍

 Can I use this for stereo headphones? No, this is a Mono (TS) connector with only one insulator ring. If used with stereo headphones, you will only hear audio through one side (typically the left). For standard headphones, you would require a Stereo (TRS) plug with two insulator rings.

What kind of cable fits into this plug? The integrated strain relief is ideal for thin to medium-gauge shielded mono cables or two-core trigger wires. It is specifically designed to grip standard 3mm to 4mm diameter cables securely.

 Do I need to solder this? Yes, this is a solder-type connector. You will need a soldering iron and solder to attach your wires to the internal terminals. This method provides a far more durable and professional connection compared to "screw-on" alternatives.