In the tropical climate of Kuala Lumpur and Selangor, cooling towers act as massive "air scrubbers," pulling in dust, pollen, and bacteria from the city air. Without regular professional cleaning, this organic matter creates a "bio-sludge" that insulates heat exchange surfaces and serves as the primary breeding ground for Legionella pneumophila.
EKG M&E Sdn Bhd provides comprehensive, MOH (Kementerian Kesihatan Malaysia) compliant cleaning services to restore thermal efficiency and ensure building safety.
The Malaysian Ministry of Health and JKKP (DOSH) recommend that cooling towers be physically cleaned and disinfected at least twice a year (quarterly for high-risk sites like hospitals). Our process follows a strict engineering sequence:
Before any physical scrubbing begins, we introduce a high-dose oxidizing biocide (chlorine or bromine) into the water.
The Goal: This "shocks" the system, killing active bacteria and loosening the Biofilm—the protective slime layer that algae and Legionella use to cling to the tower's interior.
Once the water is treated, we drain the basin (sump).
Sludge Removal: We use industrial vacuums to remove the heavy sediment, scale, and organic sludge that accumulates in the corners and low-flow areas of the basin.
Infill Deep Clean: We utilize low-pressure, high-volume water jets to clear the honeycomb infill. Using the correct pressure is vital; excessive force can shatter brittle PVC media.
Clogged nozzles lead to "Dry Spots" on the infill, which drastically reduce cooling capacity and promote localized algae blooms.
The Fix: We remove and chemically dip the spray nozzles to ensure a 100% uniform "Rain Pattern" across the heat exchange surface.
As an HVAC and Clean Air Specialist, we look beyond the "wash" to optimize the mechanical system:
Drift Eliminator Inspection: We clean and inspect the drift eliminators. If these are clogged or damaged, the tower will lose excessive treated water (drift), increasing your water bill and spreading aerosols.
VFD Modulation: We check the Variable Frequency Drive (VFD) settings. A clean tower allows the fan to run at lower speeds while maintaining the same cooling effect, significantly lowering your TNB electricity costs.
Mechanical Health Check: During the cleaning, we inspect the fan blades, motor bearings, and belt tension. A clean tower should also be a quiet, vibration-free tower.
| Feature | Unmaintained / Dirty Tower | Post-EKG M&E Cleaning |
| Heat Rejection | Restricted / Inefficient. | Optimal (Design Approach Temp). |
| Health Risk | High (Legionella & Algae). | Compliant (MOH Standards). |
| Water Usage | High (Excessive Bleed/Drift). | Optimized (Balanced Chemistry). |
| Electricity Cost | Spiking (Chiller works harder). | Reduced (Lower Head Pressure). |
Audit-Ready Reporting: We provide a full photographic report and water quality "Dip Slide" results to prove the effectiveness of the cleaning for your internal safety audits.
Chemical Balancing: We recalibrate your automatic dosing system post-cleaning to ensure the water remains stable and non-corrosive to your expensive chiller tubes.
Strategic Support: Based in Kuala Lumpur, we provide turnkey cleaning, structural repairs, and scheduled maintenance for commercial buildings, hotels, and industrial plants.
Malaysia
