Tired of cables dragging down or hitting the bottom of your TV mount? The HDMI Upward Angle Adapter is the specialist solution for ports that require an "upside" orientation. By providing a fixed 90-degree upward bend, this adapter directs your HDMI cable toward the top of your display, making it the perfect choice for cable management systems that run through the top of a wall unit or for devices with downward-facing ports.
Downward-Facing Ports: Many modern TVs have ports that point toward the floor. Use this adapter to turn the connection upward, preventing the cable from hanging visibly below the screen.
Tight Wall Clearances: Ideal for ultra-slim mounts where a standard cable would be crushed against the wall or the bottom frame.
Over-Head Cable Management: Neatly route your HDMI lines up into a ceiling cavity or a high-mounted cable trunk.
Desktop Monitors: Perfect for monitors with ports on the underside of the panel, allowing the cable to tuck neatly up and away from your desk surface.
Upward 90-Degree Orientation: Specifically designed to point your cable toward the "thin" side of the HDMI trapezoid (the top).
4K Ultra HD & 60Hz: High-speed performance that supports 4K UHD, 1080p, 3D video, and HDR for a crystal-clear digital signal.
Port Saver Technology: Reduces the mechanical stress on your TV's internal HDMI ports by moving the bend point to the sturdy adapter.
Gold-Plated Contacts: Ensures maximum signal conductivity and high resistance to oxidation and wear.
Clean Gravity Management: By routing the cable upward, you eliminate the "loop" of cable that often sags below wall-mounted electronics.
Zero Signal Interference: Fully shielded housing protects against EMI and RFI, ensuring your 4K signal remains stable.
Industrial Strength: Molded PVC construction is built to withstand the heat generated by high-performance electronics.
Connector A: HDMI Male (19-Pin)
Connector B: HDMI Female (19-Pin)
Orientation: Upward 90-Degree (Upside)
Is "Upward" the same as "90-Degree"?
There are two types: Upward (90°) and Downward (270°). To confirm you need the Upward version, check your TV port: if the "wide" part of the HDMI hole is at the bottom, this adapter will point your cable up toward the ceiling.
Does it support ARC and Ethernet?
Yes. This is a full-pin pass-through adapter. It supports Audio Return Channel (ARC) for soundbars and HDMI Ethernet Channel (HEC).
Will it fit in a recessed port?
The adapter has a slim-profile design, but if your TV's HDMI ports are deeply recessed into a small plastic cutout, please check the dimensions to ensure the 90-degree turn has enough clearance.
Malaysia
