详情
Art.Nr. 050595
Application
- Removal of all common paints incl. 2K, epoxy, EC and powder coatings. Removal of sealing residues on screw joints, lids, flanges and engine blocks.
- Removal of diesel effect, plastic and paint residues on metallic surfaces of tools and moulds in injection moulding machines, extrusion and film lines.
Properties
- Clean application
- Evaporates slowly and almost without residues
- Ideal remover of sealings
- Removes even hardest paints
- Solves brownish diesel residues
- Applicable also with galvanized material, aluminium and aluminium alloys
- Economical in consumption
Instructions
- Spray generously on the parts to be treated.
- Attention: dissolves elastomers, plastics, paints and sealings. If required, carry out precaution measures on the machines (e.g. painted parts, hydraulic hoses etc.).
- If parts are heavily soiled, repeat the cleaning process.
- Cleaning time depends primarily on the grade of contamination of the parts.
- Subsequent cleaning with CLEAN-AN/U is recommended.
- The minimum shelf life in original sealed containers, stored in a cool and dry place (no direct sunlight) is about 2 years.
- Due to the variety of applications, we highly recommend to always carry out corresponding tests prior to general use.
| Technical Data |
|
|
| Optics |
Colourless |
|
| Basis |
Different solvents |
|
| Density, 20°C |
0.75 g/cm³ |
EN ISO 3675 |
| Flash point, COC |
<-20 °C |
DIN EN ISO 2592 |
| Temperature range |
-10 - +40 °C |
|
All information stated is intended to guide preliminary product selection only. The above information is neither an assurance of product properties nor is it a general statement of fitness for use in the listed applications. Please consult with our technical staff about your specific use case and technical parameters.
更多 Pensmore Sdn Bhd 相关资料