详情
Art.Nr. 050554
Application
- For residue-free cleaning and degreasing of bearings, machine parts and injection moulds/tools. Also suited for warm tools.
- Removal of grease, oil, resin, dirt and remains of sealings.
- Typical applications: injection molding, food and pharmaceutical industry, engineering and plant equipment, automotive industy etc.
Note: This high-performance cleaner can be used for applications where technically inevitable contact with food or food packiging may occur.
Properties
- H1 registered
- Manufactured in a production facility certified to ISO 21469 hygiene requirements
- Kosher certified
- Halal certified
- Cleans quickly and efficiently
- Evaporates fast and without residues
- Guarantees absolutely clean surfaces
- Compatible with common plastic materials
- Agreeable odour
- Economical in consumption
Instructions
- Please read the corresponding material safety data sheet carefully.
- Spray generously on the parts to be treated.
- If parts are heavily soiled, repeat the cleaning process.
- Test paints and plastics on compatibility.
- Do not use under voltage in the electronics sector.
- Wait until solvents evaporated, as otherwise fire risk exists.
- The minimum shelf life in original sealed containers, stored in a cool and dry place (no direct sunlight) is about 3 years.
- Due to the variety of applications we highly recommend to always carry out corresponding tests prior to general use.
| Technical Data |
|
|
| Optics |
Colourless |
|
| Basis |
Solvents |
|
| Evaporation number |
19 (Ether= 1) |
In house |
| Temperature range |
-5 - + 50 °C |
|
All information stated is intended to guide preliminary product selection only. The above information is neither an assurance of product properties nor is it a general statement of fitness for use in the listed applications. Please consult with our technical staff about your specific use case and technical parameters.
更多 Pensmore Sdn Bhd 相关资料
Malaysia
