Industrial Gas Springs – Push Type
GS-40Individual stroke length and extension forces
Valve Technology
Extension force 500 N to 5,000 N (compressed up to 7,500 N)
Stroke 100 mm to 1,000 mm
They are supplied filled according to individual customer pressure requirements and maybe adjusted later by use of the inbuilt valve. The free of charge ACE calculation service designs the gas springs with mounting points specifically for the particular application. A variety of additional components makes assembly even easier and allows universal application of the gas springs.
ACE industrial gas push type springs are used in industrial applications, mechanical engineering and medical technology as well as in the electronics, automobile and furniture industries.
|
Extension force 500 N to 5,000 N (compressed up to 7,500 N) Stroke 100 mm to 1,000 mm Piston rod diameter Ø 20 mm Progression Approx. 38 % to 50 % Lifetime Approx. 10,000 m Operating temperature range -20 °C to +80 °C Material Outer body: steel coated with UV paint; Piston rod: steel with wear-resistant coating; End fittings: zinc plated steel Operating fluid nitrogen gas and oil Mounting In any position. Hint: We recommend mounting with piston rod downwards to take advantage of the built-in end position damping. End position damping length approx. 30 mm to 70 mm (depending on the stroke) Positive stop External positive stop at the end of stroke provided by the customer. |
NoteIntegrated grease chamber reduces friction and wear and optimises lubrication. End fittingsThey are interchangeable and if necessary must be positively secured by the customer to prevent unscrewing. Safety informationGas pressure springs should not be installed under pre-tension. On requestSpecial oils and other special options. Alternative accessories. Different end position damping and extension speed. |
Singapore
