Hilti HSA Series | Anchor Rod

Specification

HUS3-I 6 Concrete Screw Anchor

HUS3-C 6 Screw Anchor

HUS3-H 6 Concrete Screw Anchor

HUS3-A 6 Concrete Screw Anchor

Material, corrosion

Carbon steel, zinc-plated

Head configuration

Inner thread

Countersunk Torx

Hex head

Externally threaded

Approvals / test reports

ETA, Fire, VDS

ETA, Fire, VDS

ETA, Fire, Seismic, VDS

ETA, Fire, VDS

Base materials

Concrete (cracked), Concrete (hollow core), Concrete (uncracked), Masonry (solid)

Concrete (cracked), Concrete (hollow core), Concrete (uncracked), Masonry (solid)

Concrete (aerated), Concrete (cracked), Concrete (hollow core), Concrete (uncracked), Masonry (solid)

Concrete (cracked), Concrete (hollow core), Concrete (uncracked), Masonry (solid)

Type of fastening

Pre-fastening

-

Through-fastening

Pre-fastening

Reusable (and removable)

Not possible

Not possible

Possible

Not possible

Cleaning procedures

Manual cleaning

PROFIS software

Yes

Environmental conditions

Dry indoor

Installation direction

All

-

All

All

Material composition

Steel, zinc-plated (min. 5 µm)

Applications

• Various pipe or ventilation system installation applications

• Threaded rod hangers for single or multiple pipes

• Suitable for repetitive installation tasks

• Fastening handrails, railings and other ornamental steelwork

• Architectural steel plates

• Piping or ventilation applications

• Fastening channels directly to the ceiling for the installation of pipes or ventilation ducts

• Fastening handrails, railings and other ornamental steelwork

• Suitable for repetitive installation tasks

• Fastening pipes, brackets and channels with maximum efficiency

• Suitable for repetitive installation work

Advantages

• Higher productivity – less drilling and fewer operations than with conventional anchors

• M8 and M10 internally threaded heads for direct attachment of threaded rods

• Simplifies work - optimized for seismic C1/C2 applications and suitable for single point fastenings

• More reliable and easy to set – HSE product profile available

• Innovative cutting edge geometry for superior setting characteristics

• Higher productivity – less drilling and fewer operations than with conventional anchors

• Neat head design saves time – no finishing required

• More reliable and easy to set – HSE product profile available

• Unbeaten for overhead installation – greatly simplifies the work

• Removable

• Higher productivity – less drilling and fewer operations than with conventional anchors

• Neat head design, no further finishing required

• More reliable and easy to set – HSE product profile available

• Unbeaten for overhead installation – greatly simplifies the work

• Reduced edge and spacing distances

• Higher productivity – less drilling and fewer operations than with conventional anchors

• Ideal for overhead installation – greatly simplifies the work

• M8 and M10 externally threaded head for direct attachment of pipe rings

• More reliable and easier to set – HSE product profile available

• Reduced edge and spacing distances