Mechanical Properties:
| Coil | Temper Grade |
Thickness (mm) |
Width | Length | Tensile Length (N/mm²) |
Elongation (%) |
Hardness (HV) |
|---|---|---|---|---|---|---|---|
| SUS 301 CSP | 1/2H | 0.1 - 2.0 | 6mm to 600mm Up To Requirements |
Coil | 930 min | 10 min | 310 min |
| 3/4H | 0.1 - 2.0 | 1130 min | 5 min | 370 min | |||
| FH | 0.1 - 2.0 | 1320 min | - | 430 min | |||
| EH | 0.1 - 2.0 | 1570 min | - | 490 min | |||
| SH | 0.1 - 2.0 | 1740 min | - | 530 min | |||
| SUS 304 CSP | 1/2H | 0.1 - 2.0 | 6mm to 600mm Up To Requirements |
Coil | 780 min | 6 min | 250 min |
| 3/4H | 0.1 - 2.0 | 930 min | 3 min | 310 min | |||
| FH | 0.1 - 2.0 | 1130 min | - | 370 min | |||
| SUS 304 CP | 2B | 0.1 - 6.0 | 6mm to 600mm Up To Requirements |
Coil | 450 min | 22 min | 183 max |
| BA | 0.1 - 6.0 | 450 min | 22 min | 183 max | |||
| SUS 316 CSP | 1/2H | 0.1 - 2.0 | 6mm to 600mm Up To Requirements |
Coil | 780 min | 6 min | 250 min |
| 3/4H | 0.1 - 2.0 | 930 min | 3 min | 310 min | |||
| FH | 0.1 - 2.0 | 1130 min | - | 370 min | |||
| SUS 316 CP | 2B | 0.1 - 6.0 | 6mm to 600mm Up To Requirements |
Coil | 450 min | 22 min | 183 max |
| BA | 0.1 - 6.0 | 450 min | 22 min | 183 max | |||
| SUS 430 CP | 2B | 0.1 - 6.0 | 6mm to 600mm Up To Requirements |
Coil | 520 min | 40 min | 200 max |
| BA | 0.1 - 6.0 | 520 min | 40 min | 200 max |
| Material Designation | C max | Si max | Mn max | P max | S max | Ni | Cr | Mo | Cu | Etc |
|---|---|---|---|---|---|---|---|---|---|---|
| 301 | 0.15 | 1.00 | 2.00 | 0.045 | 0.03 | 6.00 - 8.00 | 16.00 - 18.00 | - | - | - |
| 304 | 0.080 | 1.00 | 2.00 | 0.045 | 0.03 | 8.00 - 10.50 | 18.00 - 20.00 | - | - | - |
| 304L | 0.030 | 1.00 | 2.00 | 0.045 | 0.03 | 9.00 - 13.00 | 18.00 - 20.00 | - | - | - |
| 304 J1 | 0.080 | 1.70 | 3.00 | 0.045 | 0.03 | 6.00 - 9.00 | 15.00 - 18.00 | - | 1.00 - 3.00 | - |
| 316 | 0.080 | 1.00 | 2.00 | 0.045 | 0.03 | 10.00 - 14.00 | 16.00 - 18.00 | 2.00 - 3.00 | - | - |
| 316L | 0.030 | 1.00 | 2.00 | 0.045 | 0.03 | 12.00 - 15.00 | 16.00 - 18.00 | 2.00 - 3.00 | - | - |
| 430 | 0.12 | 0.075 | 1.00 | 0.040 | 0.03 | - | 16.00 - 18.00 | - | - | - |
| 430 JIL | 0.025 | 1.00 | 1.00 | 0.040 | 0.03 | - | 16.00 - 18.00 | - | 0.3 - 0.8 | - |
Malaysia
