详情
BUY SN74HC32N DIP14 https://www.utsource.net/itm/p/8663612.html
| Parameter |
Description |
Value |
| Package Type |
Package style |
DIP-14 |
| Supply Voltage (VCC) |
Operating supply voltage range |
2 V to 6 V |
| Input Voltage (VIN) |
Maximum input voltage |
VCC + 0.5 V |
| Output Current (IOL) |
Output current (low level) |
25 mA |
| Propagation Delay |
Typical propagation delay time |
10 ns at VCC = 5 V |
| Operating Temperature |
Operating temperature range |
-40°C to 85°C |
| Storage Temperature |
Storage temperature range |
-65°C to 150°C |
| Power Dissipation |
Total power dissipation |
360 mW |
| Function |
Logic function |
Quad OR gate |
Instructions for Use:
- Pin Configuration: Ensure the correct orientation of the SN74HC32N in the circuit board. Pin 7 is typically connected to GND and pin 14 to VCC.
- Power Supply: Connect the supply voltage (VCC) within the specified range (2 V to 6 V). Exceeding this range can damage the device.
- Input Handling: Apply input voltages within the specified limits relative to VCC. Avoid applying voltages higher than VCC + 0.5 V.
- Output Load: The output can sink up to 25 mA. Ensure that the load does not exceed this limit to prevent damage.
- Temperature Considerations: Operate the device within the specified temperature range to ensure reliable performance. Avoid exposing the device to temperatures outside the storage range.
- Decoupling Capacitors: Place decoupling capacitors close to the power pins (VCC and GND) to minimize noise and transient effects.
- Handling Precautions: Handle with care to avoid electrostatic discharge (ESD) damage. Use appropriate ESD protection measures when handling the component.
(For reference only)
更多 Utsource Holding Company Limited 相关资料
