SR-25AP: 马来西亚的首选 Utsource Holding Company Limited

详情

Parameter	Description	Value
Part Number	Unique identifier for the component	SR-25AP
Type	Component category	Relay
Coil Voltage	Voltage required to activate the relay coil	24VDC
Coil Current	Current consumed by the relay coil	30mA
Contact Form	Configuration of the relay contacts	SPDT
Contact Rating	Maximum current and voltage the contacts can handle	10A, 250VAC
Insulation Resistance	Resistance between contacts and ground	100MΩ min
Dielectric Strength	Withstand voltage between contacts and ground	1kVAC
Operating Temperature	Range of temperatures for reliable operation	-40°C to 85°C
Mounting	Method of attaching the relay to a circuit board	PCB mount
Dimensions	Physical size of the relay	17.5 x 12.6 x 12.6 mm

Installation: Ensure the relay is installed in a location that maintains the operating temperature range (-40°C to 85°C). Use the provided mounting method (PCB mount) to secure the relay.
Coil Connection: Connect the relay coil to a 24VDC power source ensuring not to exceed the maximum coil current of 30mA.
Contact Wiring: Wire the SPDT contacts according to your circuit requirements. Do not exceed the contact rating of 10A at 250VAC.
Testing: After installation, test the relay under load conditions to ensure it operates correctly within specified parameters.
Maintenance: Regularly check connections for corrosion or damage. Ensure insulation resistance remains above 100MΩ and that dielectric strength is maintained at 1kVAC.

(For reference only)