Fluke 1587/1577 Insulation Multimeter: 马来西亚的首选 MOBICON-REMOTE ELECTRONIC SDN BHD

详情

Consult the features included on the two new insulation multimeters in the comparison chart below to help select the best tool for your application:

Feature	1587	1577
Insulation test voltages 50V, 100V, 250V, 500V, 1000V	•
Insulation test voltages 500V, 1000V		•
Insulation test: 0.01 MΩ to 2.0 GΩ	•
Insulation test: 0.1 MΩ to 600 MΩ		•
Auto discharge of capacitive voltage	•	•
Insulation test smoothing reading	•
Frequency	•
Capacitance	•
Diode test	•
Temperature	•
Min/Max	•
Low pass filter (for work on VSD's)	•
AC/DC Voltage	•	•
DC millivolts	•	•
AC/DC milliamps	•	•
Resistance (0.1 Ω to 50 MΩ)	•	•
Continuity	•	•
Three-year warranty	•	•
Remote probe, test leads, alligator clips	•	•
K-type thermocouple	•
Rugged, utility hard case	•	•
Auto power off to save battery power	•	•
True-rms	•	•
Large display with backlight	•	•
Live circuit detection prevents insulation test if voltage > 30 V is detected for added user protection	•	•
CAT III 1000V, CAT IV 600V measurement category	•	•
Accepts optional Fluke TPAKTM magnetic hanging system to free your hands for other work	•	•

Specifications

Voltage DC

Maximum Voltage:	1000 V
Accuracy:	1577: ±(0.2%+2)
	1587: ±(0.09%+2)
Maximum Resolution:	0.001V

Voltage AC

Maximum Voltage:	1000 V
Accuracy:	1577: ±(2%+3)
	1587: ±(2%+3)
AC Bandwidth:	1587: 5kHz*
	*with low pass filter; 3db @ 800 Hz
Maximum Resolution:	0.1 mV

Current DC

Maximum Amps:	400mA
Amps Accuracy:	1577: ±(1.0%+2)
	1587: ±(0.2%+2)
Maximum Resolution:	0.01 mA

Current AC

Maximum Amps:	400mA
Amps Accuracy:	1577: ±(2.0%+2)*
	1587: ±(1.5%+2)*
	* 1kHz bandwidth
Maximum Resolution:	0.01 mA

Resistance

Maximum Resistance:	50 MΩ
Accuracy:	1577: ±(1.2%+2)
	1587: ±(0.9%+2)
Maximum Resolution:	0.1Ω

Capacitance(1587 only)

Maximum Capacitance:	9,999 µF
Accuracy:	±(1.2%+2)
Maximum Resolution:	1 nF

Frequency (1587 only)

Maximum Frequency:	100 kHz
Accuracy:	±(0.1%+1)
Maximum Resolution:	0.01 Hz

Temperature Measurement (1587 only)

	-40.0 °C to 537 °C
	-40.0 °F to 998 °F
	excluding probe

Diode Test (1587 only)

Range:	6 V
Resolution:	1 mV
Accuracy:	±(2 % + 1)

Insulation Test

Minimum Test Current @ 1kΩ/V:

1mA

Test Voltages:

1577:	500, 1000 V
1587:	50, 100, 250, 500, 1000 V

Maximum Resistance per Test Voltage:

50V:
100V:
250V:
500V:
1000V:	1577: 600 MΩ
	1587: 2 GΩ

Maximum Resolution per Test Voltage:

50V:	0.01 MΩ
100V:	0.01 MΩ
250V:	0.1 MΩ
500V:	0.1 MΩ
1000V:	0.1 MΩ

Accuracy per Test Voltage:

50V:	±(3 % + 5)
100V:	±(3 % + 5)
250V:	±(1.5 % + 5)
500V:	1577: ±(2.0 % + 5)
	1587: ±(1.5 % + 5)
1000V:	1577: ±(2.0 % + 5)
	1587: ±(1.5 % + 5) to 600 MΩ, ±(10 % + 3) above 600 MΩ

Environmental Specifications

Operating temperature

–20 °C to +55 °C

Storage temperature

-40°C to +60°C

Humidity (Without Condensation)

	0% - 95% (10 °C – 30 °C)
	0% - 75% (30 °C – 40 °C)
	0% - 40% (40 °C – 55 °C)

Operating Altitude

2000 m

Safety Specifications

Overvoltage category

Complies with ANSI/ISA 82.02.01 (61010-1) 2004, CAN/CSA-C22.2 NO. 61010-1-04, and IEC/EN 61010-1 2nd Edition for measurement CAT III 1000 V and CAT IV 600 V

Agency Approvals

2000 m CAT III 1000 V, CAT IV 600 V; 3000 m CAT II 1000 V, CAT III 600 V

Mechanical & General Specifications

Size

203 x 100 x 50 mm (with holster)

Weight

624 g

Warranty

3 years

Battery life Alkaline

Meter use:	1000 hours
Insulation test use:	Meter can perform at least 1000 insulation tests with fresh alkaline batteries at room temperature. These are standard tests of 1000 V into 1 MΩ with a duty cycle of 5 seconds on and 25 seconds off.

IP Rating

IP40

[Download Datasheet]