| Model No. | MTH-080 | |
| Inner chamber size(cm) | 40×50×40 | |
| Temperature range | -70℃，-60℃, -40℃, -20℃, 0℃~150℃，other temperature can be customized | |
| Humidity range | 20%RH～98%RH(10%RH～98%RH 5%RH～98%RH)can be customized) | |
| Temp.humi.fluctuation | ±0.3℃；±0.5%RH | |
| Temp.humi.uniformity | ±2℃；±3%RH (empty load, 30 minutes after stablization) | |
| Temp.humi.resolution | 0.01℃；0.1%RH | |
| Heating&cooling time ℃/min | Heating rate 3℃/min, cooling rate 1℃/min(average rate, non-linear change) | |
| Exterior chamber material | Cold-rolled plate + Powder coating | |
| Interior chamber material | SUS#304 Stainless steel | |
| Insulation material | PU | |
| Circulation system | Centrifugal fan air circulation system | |
| Heating system | SUS# Stainless steel high-speed heater | |
| Humidification system | Electrothermal steam humidification | |
| Dehumidifying | ADP critical dew point cooling / dehumidifying method | |
| Refrigeration system | Compressor + Finned evaporator + Air (Water) cooled condenser | |
| Controlling system | Touch screen controller+SSR+PID | |
| Other components | Vacuum glass observation window | |
| Test hole (50mm) | ||
| Control status indicator | ||
| Interior light | ||
| Loading shelf (2pcs, height adjustable) | ||
| Safety protection device | Overheat protection circuit breaker | |
| Humidification system overheat protection | ||
| Compressor overload protection | ||
| Control system overload protection | ||
| Overload indicator | ||
| Phase sequence protection | ||
| Water shortage protection | ||
| High voltage and low voltage protection | ||
| Over-temperature protection | ||
| Water supply delay protection | ||
| Fan overcurrent protection | ||
| Power supply | AC 1Ψ 220V 50Hz | |
| Customization service | Non-standard or special requirements can be customized. | |
