In the industrial hubs of Kuala Lumpur and Selangor, the final point of discharge for heat, fumes, and particulates is critical to both building integrity and environmental compliance. EKG M&E Sdn Bhd provides high-performance Manufacturing Exhaust Vents, engineered to safely release process byproducts into the atmosphere while preventing back-drafts, water ingress, and unauthorized emissions. We ensure every vent installation meets BOMBA (Fire Safety) and DOE (Department of Environment) 2026 standards.
We specify the vent design based on the discharge velocity, the nature of the effluent (heat vs. chemicals), and the structural constraints of your factory roof or wall.
1. High-Velocity Vertical Discharge Stacks (Pollutant Dispersion)
For chemical fumes or VOCs that must be dispersed high into the atmosphere to meet DOE Clean Air requirements.
"No-Loss" Stack Heads: These vents are designed to discharge air vertically at high velocity without the need for a traditional rain cap that restricts flow. They utilize internal drainage channels to prevent rainwater from entering the ducting while maintaining an unobstructed vertical plume.
Guy-Wire and Structural Bracing: For tall stacks, we engineer the wind-load supports to ensure stability during Malaysia's intense monsoon storms and high-altitude winds.
2. Gravity and Powered Ridge Vents (Heat & General Exhaust)
Ideal for large-scale warehouses and assembly plants suffering from "Solar Gain" and stagnant heat.
Continuous Ridge Ventilators: These are installed along the peak of the roof to capitalize on the "Stack Effect," allowing hot air to escape naturally.
Interlocked Dampers: We install motorized dampers within the vent throat that can be closed during heavy rain or linked to the building’s fire system to prevent oxygen from feeding a localized fire.
3. Louvered Wall Vents & Sand-Trap Louvers (Fresh Air Intake & Spill)
Commonly used in mechanical rooms or as secondary spill points for non-toxic air.
Weather-Proof Blade Profiles: Our louvered vents feature "Double-Drainable" blades that prevent water penetration even at high intake velocities.
Integrated Bird & Insect Screens: We utilize heavy-duty stainless steel mesh to prevent pests from entering the ducting network while maintaining a high "Free Area" for maximum airflow.
As an industrial M&E specialist, EKG ensures your exhaust vents are a precision-integrated safety component:
BOMBA-Compliant Smoke Spill Vents:
In the event of a fire, our specialized Smoke Spill Vents are designed to open automatically. These are fabricated from heavy-gauge galvanized steel and fitted with heat-resistant actuators, ensuring that smoke is cleared from the factory floor to maintain visibility for evacuation and fire-fighting efforts.
Roof Curb and Flashing Integrity:
A vent is only as good as its seal to the building. We provide custom-fabricated Insulated Roof Curbs and heavy-duty flashing to ensure a 100% waterproof seal. This prevents leaks that could damage sensitive production machinery or electronic controls below.
Acoustic Treatment (Attenuators):
High-velocity exhaust can create "Whistling" or mechanical noise that exceeds local environmental limits. We integrate Duct Silencers immediately before the vent discharge to neutralize noise without significantly increasing static pressure.
| Feature | Standard "Cowls" / Caps | EKG Industrial Exhaust Vents |
| Discharge Pattern | Horizontal (Weak dispersion) | Vertical High-Velocity (DOE Optimized) |
| Water Protection | Moderate | No-Loss / Drainable Blade (Superior) |
| Material Gauge | Light (Rusts easily) | Heavy GI / SS316 / UV-PVC |
| Safety Interlocks | None | BOMBA & Fire Alarm Linked |
| Wind Load Rating | Low | High-Strength Structural Bracing |
DOE 2026 Ready: We ensure your discharge height and velocity meet the "Ground Level Concentration" (GLC) requirements set by the Department of Environment.
Total Weather-Proofing: Our designs are specific to the Malaysian climate, handling high rainfall and humidity without compromising your factory's interior.
Strategic KL Support: Based in Kuala Lumpur, we provide site audits for "leaky" roof vents, professional retrofits for new extraction systems, and expert installation for the Klang Valley's leading manufacturers.
Are your factory exhaust vents struggling with water leaks or failing to clear fumes?
Malaysia
