Rapid Rate Temperature Cycling Test Chamber: Pinakamahusay na Pilihan sa Selangor, KL, Malaysia Obsnap Instruments Sdn Bhd

Deskripsyon

Model: MICT-225, MICT-306, MICT-408, MICT-800, MICT-1000

Temperature Cycling Test Chamber Main Parameters:

Temperature range: -20℃/-40℃/-70℃～+150℃
Rapid-rate temperature range: -40℃～+85℃
Ramp rate:3℃/5℃/8℃/10℃/15℃ per min (linear type or non-linear type)

Description of Rapid Rate Temperature Cycling Chambers

Rapid Rate Temperature Cycling Chamber, also known as a rapid rate thermal cycling chamber, is used to test the performance of products in rapid temperature change conditions. The rapid rate thermal cycling chamber is mainly applied in aerospace products, information, electronic instrumentation, materials, electrical, electronic products, and various electronic components, etc.

Test standards: It meets GB/T2423.1-2001, GB/T2423.2-2001, GB/T2423.4-2001, etc. test standards.

As one of the most professional temperature cycling chamber manufacturers in China, Meridian has a lot of experience in rapid rate thermal cycling chamber production. With years of production and practice, Meridian has formed its own advantages different from other temperature cycling chamber manufacturers. We can provide you with high-quality temperature cycling chambers. If you are looking for a reliable, rapid-rate thermal cycling chamber supplier, please feel free to contact us!

Parameters of Rapid Rate Temperature Cycling Chamber :

Model	MICT-225	MICT-306	MICT-408	MICT-800	MICT-1000
Inner chamber size(cm)	60×75×50	60×85×60	80×85×50	100×100×80	100×100×100
Exterior chamber size (cm)			Depends on chamber design
Testing temperature range			'-70℃～150℃(KS)；-40℃～150℃(KL)；-20℃～150℃(KR)
Rapid-rate temperature range			-55℃～+85℃；-40～+80℃；-20～+80℃； 0～+80℃
Temperature gradient			3℃/min, 5℃/min, 8℃/min, 10℃/min, 15℃/min (linear or non-linear,empty loading),customization is available
Temp. fluctuation			±0.3℃
Temp. uniformity			±1.5℃(empty loading after stabilizing for 30 mins)
Temp. resolution			0.01℃
Exterior chamber material			Cold-rolled plate + Powder coating
Interior chamber material			SUS#304 Stainless steel
Insulation material			PU+ fiberglass wool
Circulation system			Centrifugal fan air circulation system
Heating system			SUS# Stainless steel high-speed heater
Refrigeration system			Compressor + Finned evaporator + Air(Water) cooled condenser
Controlling system			Touch screen controller+SSR+PID
Other components			Vacuum glass observation window
			Test hole (50mm)
			Control status indicator
			Interior light
			Compartment shelf (2 freely adjustable)
Safety protection device			Overheat protection circuit breaker
			Compressor overload protection
			Control system overload protection
			Overload indicator
			Phase sequence protection
			High voltage and low voltage protection
			Over-temperature protection
			Fan overcurrent protection
Power supply			AC 3Ψ380V 60/50Hz
Customization service			Non-standard or special requirements are all welcome

Tingnan ang karagdagang mga detalye tungkol sa Obsnap Instruments Sdn Bhd