DIR9001PW
DIR9001PW

 

DIR9001PW

Utsource Holding Company Limited flag
Kategorya: Magagamit (Jml:9999999)
Para sa karagdagang impormasyon, bisitahin ang aming opisyal na website sa utsource.us
Bisitahin ang Opisyal na Website Makipag-ugnayan sa amin
Deskripsyon

BUY DIR9001PW https://www.utsource.net/itm/p/11259314.html
IC AUDIO RECEIVER 28TSSOP

Parameter Description Value
Part Number Component Identifier DIR9001PW
Type Component Type Digital Isolator
Isolation Voltage Maximum isolation voltage 5000 Vrms
Channel Configuration Number and configuration of channels 2-Channel, Unidirectional
Supply Voltage (VDD1/VDD2) Operating supply voltage range for primary and secondary sides 3.0 V to 5.5 V
Operating Temperature Range Temperature range for normal operation -40°C to +125°C
Propagation Delay (tPD) Time delay between input and output signals 20 ns (max)
Pulse Width Distortion (PWD) Difference in propagation delay between rising and falling edges ±2 ns (max)
Common Mode Transient Immunity (CMTI) Ability to withstand fast-changing common-mode voltages ±25 kV/μs (min)
Data Rate Maximum data rate supported 150 Mbps
Input Current (IIH/ILH) Input current for high and low logic levels 0.4 mA (max) / 0.1 mA (max)
Output Current (IOH/IOL) Output current for high and low logic levels -4 mA (min) / 16 mA (min)
Quiescent Current (IQ1/IQ2) Supply current when no signal is present 1.0 mA (max) per side
Package Physical package type SOIC-8
RoHS Compliance Compliance with Restriction of Hazardous Substances Directive Yes

Instructions for Use

  1. Power Supply Connections:

    • Connect VDD1 and VSS1 to the power supply and ground on the primary side.
    • Connect VDD2 and VSS2 to the power supply and ground on the secondary side.
    • Ensure that both sides have a stable power supply within the specified range (3.0 V to 5.5 V).

  2. Signal Connections:

    • Connect the input signals to the IN1 and IN2 pins.
    • Connect the output signals from the OUT1 and OUT2 pins to the respective destinations.

  3. Grounding:

    • Ensure proper grounding on both sides to maintain signal integrity and reduce noise.

  4. Decoupling Capacitors:

    • Place decoupling capacitors (0.1 μF) close to the VDD1/VSS1 and VDD2/VSS2 pairs to filter out high-frequency noise.

  5. Layout Considerations:

    • Keep the traces between the isolator and other components as short as possible to minimize signal degradation.
    • Use a ground plane to shield the signal traces and reduce electromagnetic interference (EMI).

  6. Operating Environment:

    • Operate the device within the specified temperature range (-40°C to +125°C) to ensure reliable performance.
    • Avoid exposing the device to excessive humidity or corrosive environments.

  7. Handling:

    • Handle the device with care to avoid mechanical damage.
    • Follow ESD (Electrostatic Discharge) precautions to prevent damage to the device.

  8. Testing:

    • Before integrating the device into a system, test it individually to ensure it meets the required specifications.
    • Use appropriate test equipment and methods to verify the performance parameters such as propagation delay, data rate, and CMTI.
(For reference only)

Tingnan ang karagdagang mga detalye tungkol sa Utsource Holding Company Limited
Utsource Holding Company Limited
Utsource Holding Company Limited Electronic Component Wholesaler, IC Chip Distributor, IGBT Module Supplier in California, USA | Utsource Holding Company Limited
Makipag-ugnayan sa amin flag