74 series Digital Integrated Circuits
MDV3604URH
MDV3604URH

 

MDV3604URH

Utsource Holding Company Limited flag
Kategorya: 74 series Digital Integrated Circuits Magagamit (Jml:9999999)
Para sa karagdagang impormasyon, bisitahin ang aming opisyal na website sa utsource.us
Bisitahin ang Opisyal na Website Makipag-ugnayan sa amin
Deskripsyon

BUY MDV3604URH https://www.utsource.net/itm/p/9143663.html

Parameter Symbol Min Typ Max Unit Description
Input Voltage VIN 2.7 - 5.5 V Operating input voltage range
Output Voltage VOUT 1.8 - 3.3 V (Adj) Adjustable output voltage
Output Current IOUT - 4 - A Continuous output current
Quiescent Current IQ - 20 - μA Quiescent current at no load
Efficiency η - 90 - % Typical efficiency
Dropout Voltage VDROPOUT - 200 - mV Dropout voltage at full load
Load Regulation - - 1 - % Change in VOUT with load change
Line Regulation - - 0.1 - %/V Change in VOUT with VIN change
Ripple Rejection - - 60 - dB Power supply rejection ratio
Operating Temperature TOPR -40 - 125 °C Operating temperature range
Storage Temperature TSTG -65 - 150 °C Storage temperature range
Package Type - - - - SOT-23-5 Package type

Instructions for Use:

  1. Input Connection:

    • Connect the input voltage (VIN) to the designated pin on the MDV3604URH.
    • Ensure the input voltage is within the specified range (2.7V to 5.5V).

  2. Output Configuration:

    • Set the output voltage (VOUT) by using external resistors if adjustable.
    • The typical output voltage can be set between 1.8V and 3.3V.

  3. Load Connection:

    • Connect the load to the output pins (VOUT and GND).
    • Ensure the load does not exceed the maximum output current (4A).

  4. Capacitors:

    • Use appropriate input and output capacitors to stabilize the circuit.
    • Recommended values: 10μF ceramic capacitor for input and 10μF ceramic capacitor for output.

  5. Thermal Management:

    • Ensure adequate heat dissipation, especially when operating at high currents or temperatures.
    • Consider using a heatsink if necessary.

  6. PCB Layout:

    • Place the MDV3604URH close to the input and output capacitors to minimize trace inductance.
    • Keep the ground plane solid and wide to reduce noise and improve thermal performance.

  7. Testing:

    • Before finalizing the design, test the regulator under various load and input conditions to ensure stability and performance.
    • Measure the output voltage, ripple, and efficiency to verify proper operation.

  8. Storage and Handling:

    • Store the MDV3604URH in a dry, cool place to avoid moisture damage.
    • Handle the device with care to prevent static discharge and physical damage.
(For reference only)

Tingnan ang karagdagang mga detalye tungkol sa Utsource Holding Company Limited
Utsource Holding Company Limited
Utsource Holding Company Limited Electronic Component Wholesaler, IC Chip Distributor, IGBT Module Supplier in California, USA | Utsource Holding Company Limited
Makipag-ugnayan sa amin flag