| TECHNICAL PARAMETER | JH-11C100-4A | |
| Motor Power | KW | 5.5 |
| 4 Platform | ||
| Spindle Speed | r/min | 2,880 |
| Disc Diameter | mm | 1,500 |
| Wheel Diameter | mm | 250-350 (Wide 50*150) |
| Outline Dimension | mm | 2,800*2,600*2,200 |
| Function Introduction | : | This Machine Is Mainly For Plane Cylindrical Products Aluminium Alloy, Stainless Steel Cup & |
| Kettle & Other Metal Materials, & The Side Surface Of Workpiece Sanding, Wire Drawing, | ||
| Polishing & Other Processing, Such As Stainless Steel Cup, Aluminium Pot, Kettle & So On The | ||
| Work | ||
| Features Of This Machine | 1 | The Machine Is Equipped With 4 Grinding Heads, Which Can Be Installed In Four Different |
| Grinding Wheels | ||
| 2 | Can Install The Different Consumables Such As Flax Wheel, Cloth Wheel, Grinding Wheel, Nylon | |
| Wheel & Other Different Consumables For Polishing, Sanding & Drawing Processing | ||
| 3 | Grinding Head Relative To Workpiece Can Make Electric Up & Down Or So Angles Before & | |
| After Adjustment, The Loss Of Grinding Wheel Can Automatically Compensate Feed, Polishing | ||
| Wheel Grinding Time Can Be Set Up Accordingly To The Needs Of Different Product Effect Of | ||
| Intelligent | ||
| 4 | The Machine Is Equipped With Automatic Waxing Function, & The Equipment Has Failure Alarm | |
| Function | ||
| 5 | The Machine Wheel Can Fine-Tune The Product, & Each Grinding Wheel Can Be Responsible | |
| For Grinding Or Polishing The Different Surface Of The Product, High Efficiency, Low Labor Cost | ||
| 6 | The Machine Is Equipped With PLC Intelligent Programming System & Man-Machine Interface, | |
| Whish Is Easy To Operate |
