E.MIX ALC Thin Mortar

Substrate preparation :

• Remove dust, loose particles, grease and traces of foreign materials that may affect adhesion

Mixing & Installation

• 14.4 Ltr of clean water mix with one bag (40kg) E.MIX ALC Thin Mortar
• Allow mixture to stand for 10 minutes for additives to dissolve.
• Ensure joint of ALC blocks are fully covered with the thin mortar by notched trowel. 
• Upon apply of ALC Blocks, immediately remove excess thin mortar.
• allow to be set for 24 to 48 hours to achieve its initial bond strength