Deskripsyon
Function
Wipers are designed to keep dust, dirt, sand and others off the rod and the sealing and
guiding elements, avoiding abrasive damage caused by external contamination.
Features
- The profile is designed with two geometric different lips for wiping off any dirt on
the rod and to reduce the residual oil film on the medium side.
- The wiper consists of a PTFE wiping part and an O-Ring as preload element,
maintaining contact pressure on the rod.
- Due to the use of an O-Ring the wiper is able to compensate deflections of the rod.
- Mainly used in combination with rod seal RS09B.
- Pressure should be limited to 15bar.
- For housings acc. to ISO 6195 Type D.
Application
Reciprocation rods in hydraulic cylinders, swivelling and coiling rods, plungers.
Installation
Snap-in installation for wipers bigger 25mm otherwise a partite groove is recommended.
A large insertion chamfer needs to be provided (angle 20-30°).
Tingnan ang karagdagang mga detalye tungkol sa Polyseals CNC Fabrication Sdn Bhd
