Be used to test the ability of endurance of material structures or composite materials in a continuous condition of extremely high temperature and extremely low temperature.
Widely used in the industries of metals, plastics, rubber, electronics, auto parts and other materials.
| Model | MTST-050Y | MTST-080Y | MTST-108Y | MTST-216Y | MTST-252Y |
| Test zone size W×H×D(cm) | 36×35×40 | 50×40×40 | 60×40×45 | 60×60×60 | 60×70×60 |
| Exterior chamber size(cm) | 128x182x205 | 142x192x205 | 152x192x210 | 215x213x205 | 215x223x205 |
| Hot zone temp. range | +60℃ ～ +200℃ | ||||
| Cold zone temp. range | -10℃～-40℃，-10℃～-60℃，-10℃～-70℃ | ||||
| Test zone temp. range | -40℃～+150℃，-55℃～+150℃，-60℃～+150℃ | ||||
| Temp. fluctuation | ±2℃ | ||||
| Temp. recovery time | <5min | ||||
| Specimen transfer time | within 15 seconds | ||||
| Heating&cooling time ℃/min | Average 3 ℃/min for heating, 1℃/min for cooling ( empty) | ||||
| Exterior material | Painted steel | ||||
| Internal tank | Stainless steel plant #304 | ||||
| Insulation | PU+Fiberglass wool | ||||
| Heating system | Stainless steel high temp. heater | ||||
| Cooling system | Compressor + Finned evaporator + Air(Water) cooled condenser | ||||
| Controller | Touch LCD ++ SSR + PID | ||||
| Accessories | Vacuum glass observation window | ||||
| Power test hole (50mm) | |||||
| Control status indicator | |||||
| Interior light | |||||
| Load shelf (2 freely adjustable) | |||||
| Protection | Overheat protection circuit breaker | ||||
| Compressor overload protection | |||||
| Control system overload protection | |||||
| Overload indicator | |||||
| Phase sequence protection | |||||
| High voltage and low voltage protection | |||||
| Over-temperature protection | |||||
| Fan overcurrent protection | |||||
| Power supply | AC 3Ψ380V 60/50Hz | ||||
| Customization | Special requirements, custom service | ||||
