APPLICATION
Ideal for bonding of laminate, rubber, cork, leather, fiberglass, polyurethane foam, EVA to wood, metal, or concrete. It is also suitable for carpet installation.
APPLICATION DIRECTION
1. Surfaces must be clean, dry and free of dirt, grease, oil or water.
2. Stir adhesive before use.
3. Apply the adhesive to both surfaces to be bonded with a dry, clean brush or scraper to give a uniform coating.
4. Allow the solvents to evaporate until the adhesive film is touch dry. It will take between 5 to 15 minutes depending upon surface porosity and weather condition.
5. Allowing the solvent to evaporate completely before assembly is essential to obtain a secure, permanent bond.
6. Position the coated surfaces accurately before assemble them.
7. Apply even pressure to consolidate the bond.
