Powermax85 SYNC plasma cutter: Pinakamahusay na Pilihan sa Johor Bahru (JB), Malaysia, Selangor, Kuala Lumpur (KL), Singapore, Indonesia, Vietnam Amcoweld (M) Sdn Bhd

Deskripsyon

The Hypertherm Powermax85 SYNC is a next-generation professional plasma cutting system designed for high-performance cutting and gouging applications up to 25 mm (1"). Featuring RFID-enabled SmartSYNC torches and a revolutionary single-piece cartridge consumable, it delivers simplified operation, optimized cut quality, reduced downtime, and maximum productivity.

Highlighted product features:
Easy to use
• SmartSYNC torches with the cartridge automatically set the correct amperage and operating mode, eliminating setup errors
• Easy to identify single-piece cartridges are color-coded by process to eliminate parts mix-up and simplify consumable inventory management
• End-of-life detection lets the operator know when it’s time to change the cartridge
• Simplified operation minimizes downtime, troubleshooting, waste, and training time

Versatile
• • Tackle a wide range of jobs with easily interchangeable torch styles and application-specific cartridges for various types of cutting and gouging
• Time-saving torch controls allow the operator to adjust the amperage on the fly and change cartridges and applications without returning to the power supply
• Access cartridge data for performance tracking and analyzing usage patterns

Industry-leading reliability
• Powermax plasma cutters are known to last decades in the field, minimizing maintenance and downtime
• Power supplies and torches are engineered for rugged industrial environments
• Each Powermax component is tested to perform reliably in demanding conditions

Cut capacities

Cut capacity	Thickness	Cut speed
Recommended	25 mm (1")	500 mm/min (20 ipm)
	32 mm (1-1/4")	250 mm/min (10 ipm)
Severance (hand cutting)	38 mm (1-1/2")	125 mm/min (5 ipm)
Pierce*	20 mm (3/4")

*Pierce rating for handheld use or with automatic torch height control

Gouge capacity	Metal removel rate	Groove profile
Typical gouge	8.2 kg (18.2 lbs) per hour	3.2 mm (.12") D x 6.8 mm (.26") W

Torch output**	12.2 kW
	85 A x 143 V ÷ 1000 W = 12.2 kW

**Higher output voltage at the torch plus efficiently designed consumables result in a faster, cleaner cut.

SPECIFICATIONS - CSA (for use in the Americas and Asia, except China)

Input voltages (± 10%)	200–480 V, 1-PH, 50/60 Hz
Input voltages (± 10%)	200–600 V, 3-PH, 50/60 Hz
Input current @ 12.2 kW	200/208/240/480, 1-PH 70/68/58/29 A
Input current @ 12.2 kW	200/208/240/480/600 V, 3-PH 42/40/35/18/17 A
Output current	25–85 A
Rated output voltage	143 VDC
Duty cycle @ 40° C (104° F)	60% @ 85 A, 230–600 V, 3-PH
	60% @ 85 A, 480 V, 1-PH
	50% @ 85 A 240 V, 1-PH
	50% @ 85 A, 200–208 V, 3-PH
	40% @ 85 A, 200–208 V, 1-PH
	100% @ 66 A, 230–600 V, 1/3-PH
Open circuit voltage (OCV)	305 VDC
Weight with 7.6 m (25') torch	32 kg (67 lbs.)

SPECIFICATIONS - CE (for use in Europe, Australia & New Zealand - RCM, Serbia, UK - UKCA, Ukraine, and other countries where accepted)

Input voltages (± 10%)	400 V, 3-PH, 50–60 Hz
Input current @ 12.2 kW	380/400 V, 3-PH 20.5/19.5 A
Output current	25–85 A
Rated output voltage	143 VDC
Duty cycle @ 40° C (104° F)	60% @ 85 A, 380–400 V, 3-PH
Duty cycle @ 40° C (104° F)	100% @ 66 A, 380–400 V, 3-PH
Open circuit voltage (OCV)	270 VDC
Weight with 7.6 m (25') torch	23.5 kg (52 lbs.)

General specifications:

Dimensions with handles	483 mm D; 233 mm W; 430 mm H (19" D; 9.2" W; 17" H)
Gas supply	Clean, dry, oil-free air or nitrogen
Recommended gas inlet flow rate/ pressure	Cutting: 210 l/min @ 5.9 bar, (450 scfh, 7.5 scfm @ 85 psi)
Recommended gas inlet flow rate/ pressure	Gouging: 210 l/min @ 4.8 bar, (450 scfh, 7.5 scfm @ 70 psi)
Input power canble length	3 m (10')
Power supply type	Inverter – IGBT
Engine drive requirement	20 kW or 25 kVa for full 85 A output
Electrical efficiency	91.9%
Recyclability	100%
Warranty	Power supply: 6-year, Torch: 1-year

Tingnan ang karagdagang mga detalye tungkol sa Amcoweld (M) Sdn Bhd