FS00600A is a TVOC sensor probe based on semiconductor principle, which is highly sensitive to polluting gases. For example, when there are molecules of secondhand smoke or cosmetics volatilizing indoors, the sensor can generate changes in conductivity. By utilizing this sensitive characteristic of the sensor and simple microcontroller control, it is possible to achieve intelligent activation of exhaust ventilation equipment, thus achieving the effect of intelligently purifying indoor air.
low power consumption
long service life
simple circuit application
1.Gas detectors, instruments and meters
2.Indoor exhaust fan ventilation fan control module
3.Air quality tester and module
4.Air purifier, plasma purifier automatic control module
|
Package Standard |
Metal TO-05 |
|||
|
Detectable gases |
Hydrogen, alcohol, smoke, etc. |
|||
|
Detection range |
0-200PPM (alcohol) 0-10PPM (formaldehyde) 0-10000 (natural gas) 5-500PPM (hydrogen) |
|||
|
Standard Circuit |
Heating voltage |
VH |
5.0±0.2V DC/AC |
|
|
Component characteristics under standard test conditions |
Circuit voltage |
VC |
5.0±0.2V DC |
Ps≤15mW |
|
Load resistor |
RL |
adjustable |
Ps≤15mW |
|
|
Heating element resistor |
RH |
90Ω±10Ω(room temperature) |
||
|
Heating element current |
Rs |
|
||
|
Heating element power consumption |
S |
320mW |
||
|
Sensitivity Changes PH |
0.4~0.7V |
5ppm(Ethanol) |
||
|
Under standard test conditions |
Temperature and humidity |
20℃±2℃；65%±5%RH |
||
|
Preheating time |
No less than 24 hours |
|||
|
Response time |
≤30s |
|||
|
Separation time |
≤60s |
|||
Malaysia
