Application
Designed for battery modules/PACKs for electric vehicles, buses and various energy storage systems, it integrates automated testing, data analysis and efficiency optimization functions, providing one-stop static testing solutions covering off-line inspection and quality control.
Testing Functions
|
Safety test |
Insulation resistance test,DC/AC withstand voltage test, equipotential test |
|
Electrical Performance Test |
TotalVoltage, Total Internal Resistance, Voltage difference, NTC Accuracy, BMS PowerConsumption |
|
BMS communication andfunction test |
CAN/CANFD, RS485 communication, DBC analysis, UDS diagnostics, CAN terminalresistance |
|
Signal Simulation Test |
PWM signal simulation, collision signalsimulation, charging gunsignalsimulation,high-voltage interlock simulation, insulation leakage simulation. |
|
Product Parameters |
|||
|
Open-circuit Voltage |
Module |
1000V Max |
|
|
PACK |
2000V Max |
||
|
AC WithstandingVoltage |
5KV/100mA |
||
|
DC Withstanding Voltage |
6KV/7.2KV/10mA |
||
|
Insulation resistance |
6KV/99.99GΩ |
||
|
Ground resistance |
25A/600mΩ |
||
|
AC Resistance ACIR |
0.1mΩ~3KΩ |
||
| BMScommunication module |
Supports CAN2.0A/B, CAN FD, CAN OE, LIN, RS232, RS485 |
||
|
UDS Diagnostics/Unlocking |
Supported |
||
|
Specialcustom module |
DCIR,Oscilloscope, Air Tightness Tester, etc. can be integrated. |
||
| Protection Rating | IP32 | ||
|
Cabinet size（W*D*H mm） |
850*800*1980 |
||
