The blower fan (or centrifugal fan) is the powerhouse behind most Air Handling Units (AHUs), cooling towers, and industrial exhaust systems. Over time, the heavy rotating assembly—consisting of the impeller, shaft, and bearings—suffers from material fatigue, grease degradation, and "unbalance" due to dust accumulation.
A Mechanical Fan Overhaul by EKG isn't just a cleaning; it is a full-scale engineering restoration designed to bring the blower back to its peak efficiency and silent operation.
A comprehensive overhaul targets the three "Critical Failure Points" of a centrifugal blower:
The Impeller (Wheel): Whether it is Forward Curved, Backward Inclined, or Airfoil, the blades must be structurally sound. We inspect for "stress cracks" at the blade roots and remove hardened "scale" or dirt that causes high-vibration shaking.
The Shaft & Bearings: The shaft must be perfectly straight (within 0.05mm runout). We replace standard bearings with premium Pillow Block or Split-Housing bearings (e.g., SKF or NSK) designed for high-speed industrial loads.
The Scroll (Housing): We inspect the internal casing for "pitting" or corrosion. If the scroll is leaking air, the fan loses static pressure, forcing the motor to work harder.
The most common cause of blower failure in KL is "Unbalance." Even 10 grams of uneven weight on a large 1000mm impeller can generate hundreds of kilograms of centrifugal force at 1450 RPM.
Vibration Analysis: We use digital accelerometers to measure the "Velocity" (mm/s) and "Displacement" (microns) of the vibration.
Correction Weights: We add permanent, welded, or bolted weights to the impeller to bring it within ISO 1940 G2.5 standards.
The Result: A balanced fan runs colder, quieter, and puts zero "side-load" on the motor, extending the life of the machine by years.
A "dirty" or "worn" blower fan is an energy thief. When blades are coated in dust, their aerodynamic profile changes, requiring more torque to move the same volume of air.
Efficiency Restoration: By cleaning and balancing the blower, we reduce the "Parasitic Load" on the motor.
The Math: An optimized blower allows the Variable Frequency Drive (VFD) to maintain building pressure at a lower RPM. According to the Cube Law, a 20% reduction in fan speed results in a nearly 50% reduction in power consumption.
| Feature | Standard Maintenance | EKG Mechanical Overhaul |
| Cleaning | Surface Wipe | Full Chemical Degreasing & Blade Scraping |
| Bearings | Re-greasing only | Full Replacement with Premium Brands |
| Balancing | None | Digital Dynamic Balancing (ISO G2.5) |
| Shaft | Visual check | Dial Indicator Runout & Laser Alignment |
| Housing | Visual check | Internal Coating & Leak Sealing |
Laser Shaft Alignment: We don't just "eye-ball" the motor-to-fan connection. We use Dual-Beam Laser Tools to ensure the motor and fan shafts are perfectly collinear, preventing "Coupling Failure."
Advanced Metallurgy: For blowers in corrosive environments (like coastal areas or chemical labs), we apply Epoxy or Cold-Galvanized coatings to the impeller to prevent future rust.
Thermal Imaging Post-Audit: After the overhaul, we run the fan for 60 minutes and use infrared cameras to check the bearing temperatures. A healthy bearing should never exceed 65°C under normal load.
Minimal Downtime: We understand that your building needs air. Our teams operate 24/7 during scheduled shutdowns to ensure your AHU is back online before the next business day.
Malaysia
