Keep your power-hungry 5V electronics running smoothly with our 5V 3A AC-DC Adaptor. Delivering a robust 15W of power, this adaptor is specifically designed for devices that require more current than standard chargers can provide. Featuring a specialized universal DC tip compatible with both 2.1mm and 2.5mm ports, and a generous 1.5-meter (1.5m) cable, it offers the ultimate combination of versatility and reach.
Microcomputers: Ideal for the Raspberry Pi 3 and other single-board computers that demand a stable 3A supply to prevent "under-voltage" warnings.
TV Boxes & Media Players: Perfect for Android TV boxes, streaming sticks, and digital converters.
Networking Hardware: Power up high-speed USB hubs, network switches, and wireless access points.
LED Lighting: High enough amperage to drive 5V LED strips (WS2812B/SK6812) for gaming setups or accent lighting.
3A High-Amperage Output: Provides a full 3000mA of current, ensuring that even under heavy processing loads, your devices remain stable.
Universal 2.1/2.5mm Connector: The intelligent inner-contact design allows this single plug to fit the two most common 5V DC barrel sizes securely.
1.5m Heavy-Duty Wire: The long 1.5-meter cable is built with high-quality copper to minimize voltage drop over distance.
Integrated Safety Suite: Protects your equipment with built-in over-voltage, short-circuit, and thermal overload protection.
Stop System Crashes: Many 5V devices fail due to insufficient current; this 3A power brick provides the "overhead" needed for peak performance.
Low Interference: High-grade internal shielding reduces electromagnetic interference (EMI), protecting your Wi-Fi and audio signals.
Robust Build Quality: Features reinforced strain relief at both ends of the cable to prevent fraying and ensure a long service life.
Input: 100-240V AC 50/60Hz (Global Voltage)
Output: 5V DC 3A (15W Max)
Connector: Universal 2.1mm / 2.5mm Barrel (Center Positive)
Cable Length: 1.5 Meters (1.5m)
My device only asks for 2A; is 3A too much?
No. Amperage is "demand-based." Your device will only draw the 2A it needs, and the 3A adaptor will run cooler and last longer because it isn't being pushed to its limit.
Will this fit my 2.1mm port?
Yes. The universal tip is designed with a spring-loaded internal contact that grips a 2.1mm pin perfectly while still fitting into a 2.5mm socket.
Can I use this for a USB-C device?
Only if you use a DC-to-USB-C adaptor. This unit comes with a standard round barrel jack.
Malaysia
