Solve depth constraints and complex internal wiring with the Audio Series. This 3-Pin XLR Female Right-Angle (L-Shape) Mounting Socket is the definitive solution for shallow equipment racks, floor boxes, and slimline active speaker panels. By orienting the solder terminals at a 90-degree angle to the faceplate, it allows for professional balanced audio inputs in spaces where a standard straight socket would hit internal components or the back of a shallow enclosure.
Ultra-Shallow Rear Profile: Drastically reduces the "keep-out" zone behind the panel, making it ideal for thin wall partitions or 1U rack gear with high component density.
Secure Latching Interface: Features the standard XLR spring-loaded lock and "Push" release, ensuring your input cables stay physically secured even in high-vibration environments.
Optimized Cable Management: The 90-degree exit for the internal wiring allows for cleaner cable looms that can be routed immediately along the panel wall.
Balanced Noise Rejection: Constructed with a rugged die-cast zinc alloy shell to provide a continuous shield against EMI and RFI interference.
Floor Boxes & Pocket Panels: Perfect for stage pits or conference room floor boxes where depth is extremely limited.
In-Wall Audio Plates: Install in standard electrical back-boxes where the wall cavity depth is restricted by brick or concrete.
Custom Pedalboard Interfaces: Use on the side-panels of touring pedalboards where internal space is packed with power supplies and effects.
Compact Active Speakers: Ideal for the input plate of slimline monitors where the woofer magnet or amplifier board is close to the chassis.
Standard D-Series Flange: Despite the L-shape rear, it fits the universal 24mm "D-size" cutout, maintaining compatibility with all standard rack panels.
High-Conductivity Sockets: Features precision-machined female contacts (typically silver-plated) for maximum surface area contact and low signal loss.
Rigid Solder Terminals: The 90-degree terminals are designed to be sturdy, allowing for easy soldering of balanced (hot, cold, and ground) wires.
Standard Pin Numbering: Molded pin IDs (1, 2, 3) ensure your installation follows international AES standards for balanced audio.
Product Type: XLR Female Chassis Mount (Right-Angle)
Included: 1x 3-Pin XLR Female L-Shape Mounting Socket
1. Does the "Push" button still work the same way? Yes. The latching and release mechanism is identical to the straight version. The only difference is the physical orientation of the pins on the back of the unit.
2. Can I rotate the terminal direction? Most L-shape sockets have a fixed orientation (usually terminals pointing "down" or "sideways"). Be sure to check the specific part alignment before drilling your mounting screw holes.
3. Is it harder to wire in a rack? It is actually often easier because the wires don't stick out into the rack space. However, because the pins are closer to the panel, we recommend using Heat Shrink Tubing to prevent any chance of the wires touching the metal chassis.
More detail about EMX Electronic Trading Sdn Bhd
Malaysia
