Solve depth constraints and cable strain with the Audio Series. This 3-Pin XLR Male Right-Angle (L-Shape) Mounting Plug is the definitive solution for shallow equipment racks, floor boxes, and compact stage equipment. By orienting the solder terminals at a 90-degree angle to the faceplate, it allows for professional balanced audio connections in spaces where a standard straight connector simply won't fit.
Ultra-Shallow Profile: Reduces the required depth behind the panel by up to 50%, making it ideal for thin wall partitions or slimline electronic enclosures.
Reduced Cable Strain: The 90-degree internal orientation allows wires to exit downward or sideways immediately, preventing tension on the solder joints.
Balanced Signal Shielding: Features a rugged die-cast zinc alloy shell that provides 360-degree protection against EMI and RFI hum.
High-Conductivity Contacts: Equipped with precision-machined silver-plated pins for reliable, low-noise audio transmission in mission-critical environments.
Shallow Wall Plates: Install in standard electrical back-boxes where depth is limited by bricks or structural beams.
Floor Boxes: Perfect for stage or conference room floor pockets where the lid must close over the connected cables.
Custom Pedalboards & Gear: Integrate into the side-panels of custom guitar pedalboards or portable recording rigs.
Powered Speaker Repair: Replace straight connectors in active speakers where internal components (like the woofer or amp) are too close to the input panel.
Orientable Terminals: The internal insert can often be rotated or is fixed in a downward-facing position to facilitate neat wire looms.
Standard D-Series Footprint: Despite the L-shape back, the front mounting flange follows the universal 24mm "D-size" standard.
Robust Solder Buckets: Large terminals designed to accommodate up to 14 AWG wire, ensuring a strong mechanical and electrical bond.
Standard Pin Numbering: Clearly marked pins (1, 2, 3) ensure correct wiring according to international AES standards.
Product Type: XLR Male Chassis Mount (Right-Angle)
Included: 1x 3-Pin XLR Male L-Shape Mounting Plug
1. Does the L-shape affect the audio quality? No. The signal path is identical to a straight connector. As long as your solder joints are clean, there is zero difference in frequency response or noise floor.
2. Is it harder to solder than a straight plug? It requires a bit more precision because the terminals are closer to the back of the flange. We recommend using a Soldering Helping Hand and thin-diameter solder for the best results.
3. Can I change the direction the wires point? Most L-shape panel mounts have a fixed orientation (usually pointing "down" relative to the mounting holes). Ensure you check the orientation before drilling your panel holes.
More detail about EMX Electronic Trading Sdn Bhd
Malaysia
