TAW-301 BNC MALE  DUAL BINDING POST

Signal Bridge: BNC Male to Dual Binding Post Adaptor

Bridge the gap between coaxial systems and raw-wire testing with the EMX Connectivity Series. This specialized BNC Male to Dual Binding Post Adaptor (often called a "Banana Plug Adaptor") is the definitive solution for technicians and engineers. It allows you to convert a BNC signal into two separate binding posts, making it easy to connect test leads, bare wires, or banana plugs.

Why the Binding Post Adaptor is a Laboratory Essential:

• Universal Testing Interface: Converts a standard BNC output into red and black binding posts, accepting bare wire, spade lugs, or standard 4mm banana plugs.

• Clear Polarity Identification: Features a bright red post for the signal (center pin) and a black post for the ground (shield), ensuring correct wiring every time.

• High-Grade Insulation: Constructed with heavy-duty ABS or Nylon bodies to prevent accidental short circuits during sensitive measurements. 

• Side-Stackable Design: Most models include a cross-hole in the posts, allowing for multiple leads to be "daisy-chained" or stacked for complex testing rigs.

Where to Use It:

• Laboratory & R&D: Connect standard oscilloscope probes or signal generators to breadboards and custom circuit prototypes.

• RF & Antenna Testing: Ideal for measuring the impedance or signal strength of wire antennas and balanced feedlines.

• Audio Engineering: Adapt professional BNC-equipped digital interfaces for testing with standard speaker or line-level wires.

•  Field Maintenance: A "must-have" for technicians who need to inject signals or monitor lines where no BNC connector is present.

Key Features:

• Gold/Nickel Plated Contacts: Ensures a low-resistance electrical path for accurate data and signal transmission.

• BNC Twist-Lock: The male end features standard bayonet lugs for a secure, vibration-proof connection to any BNC female socket.

•  Versatile Wire Entry: Sockets allow for wire insertion from the top or through the side-hole for maximum flexibility.

Technical Specs:

•  Product Type: BNC Male to Dual Binding Post

• Colours: Signal (Red) / Ground (Black)

• Included: 1x BNC Male to Dual Binding Post Adaptor

Top 2 Customer Questions & Concerns ‍

1.  Which post is the "hot" signal? The Red post is always connected to the BNC center pin (the signal). The Black post is connected to the BNC outer shell (the ground/shield).

2. Can I use this for high-wattage power? While these are built for signal testing, they are generally rated for low to medium current. For high-power applications, check the specific Amperage rating on your EMX datasheet.