Standard centrifugal pumps fail when air enters the line—requiring manual priming, check valves, and downtime. Self-priming electric centrifugal pumps eliminate this risk. They automatically evacuate air and reprime without operator intervention, ensuring continuous flow in cooling towers, pressure boosting, wastewater transfer, and industrial circulation. Without them, facilities face pump trips, dry running damage, and disrupted operations. EKG (Malaysia) Sdn Bhd supplies, installs, and retrofits high-efficiency self-priming centrifugal pumps for clean water, corrosive fluids, and light slurry applications .
Our self-priming pump solutions serve:
HVAC Cooling Tower & Condenser Water Circulation
Industrial Process & Boiler Feed Systems
Water Treatment & Pressure Boosting Stations
Irrigation, Washdown & General Water Transfer
Wastewater & Light Slurry Handling
Fire-Fighting & Emergency Backup Duty
Loss of Prime – Air ingress, leaky foot valves, or insufficient liquid in casing
Dry Running Damage – Mechanical seal failure and impeller overheating
Clogged Ejector Systems – Built-in ejector blocked by debris or dissolved gases
Corrosion & Wear – Aggressive fluids degrading cast iron or standard seals
Oversized/Undersized Selection – Inefficient operation, cavitation, or insufficient suction lift
1. Pump Selection & System Sizing
Match flow (up to 960 m³/h) and head (up to 80 m) to application
Material selection: Stainless steel for potable/corrosive duty, cast iron/ductile iron for slurry
Single-phase or three-phase motor configuration
2. New Installation & Retrofit
Close-coupled or long-coupled configurations
Ejector system verification for reliable repriming
VSD-ready installations for variable demand
3. Mechanical Seal & Impeller Replacement
Carbon/ceramic, silicon carbide, or tungsten carbide seals
Closed impeller or solids-handling impeller options
Bearing and shaft realignment
4. Automatic Priming System Restoration
Ejector cleaning and diffuser replacement
Suction check valve refurbishment
Air vent valve calibration (high-temp applications)
5. Protection & Control Upgrades
Thermotection® thermal cut-out to prevent dry running damage
IP55 / IP56 TEFC motor specification
Low-level suction protection integration
6. 24/7 Emergency Breakdown Response
On-site troubleshooting for failed prime or seized motors
Temporary rental replacement available
Minimise production and cooling downtime
Pump Application Specialists – Expertise in centrifugal hydraulics, suction lift calculations, and fluid compatibility
Multi-Brand Support – LOWARA, MONZA, Pentair, DESMI, and equivalent replacements
ISO-Certified Repairs – Precision machining, seal installation, and motor testing
Fast Mobilisation – Kuala Lumpur & Selangor-based with nationwide coverage
Energy-Efficient Operation – Right-sized pumps and VSD-ready installations
Stop chasing lost prime and dry running failures. EKG (Malaysia) Sdn Bhd delivers self-priming electric centrifugal pumps engineered for instant start-up, continuous duty, and minimal maintenance.
Book your pump consultation today! Contact us now for a free assessment and expert pump selection for your facility.
More detail about EKG M & E SDN. BHD.
Malaysia
