Aluminum Foil Heat-Resistant Gloves: Top Choice in Malaysia, Melaka, Selangor, Kuala Lumpur (KL), Johor Bahru (JB), Sarawak ALLIANCE SUPPLIES SDN BHD

Description

Flame retardancy (EN 15025): When tested according to the specifications of standard EN 15025, the aluminum foil gloves met all the requirements of the highest level (Level 4).

When tested according to the specifications of standard EN 702, aluminum foil gloves meet the Level 1 requirements for thermal protection (EN 702) .
When tested according to the standard EN 9151, the aluminum foil gloves met the Level 1 requirements for convective heat protection (EN 9151) .
When tested according to the standard EN 6942, the aluminum foil gloves met the highest level (Level 4) requirements for radiant heat protection (EN 6942) .
When tested according to the specifications of standard EN 348, aluminum foil gloves meet the highest level (Level 4) requirements for protection against small droplets of molten metal splashes (EN 348) .
When tested according to the standard EN 348, aluminum foil gloves meet the highest level (Level 4) requirements for protection against molten metal splashes (EN 9185) .
Excellent mechanical protection (EN 388)
When tested according to the specifications of standard EN 388, the aluminum foil gloves achieved excellent results in all four mechanical protection tests.

Abrasion resistance – EU standard EN 407
Protection level	Burn duration (seconds)	Duration of red glow (seconds)
1	"f 20	N/A
2	"f 10	≤ 120
3	"f 3	"f 25
4	"f 2	"f 5

Thermal protection against contact – EU standard EN 407
Protection level	Contact temperature (°C)	Protection time (seconds)
1	100	≥ 15
2	250	≥ 15
3	350	≥ 15
4	500	≥ 15

Convection thermal protection – EU standard EN 407
Protection level	Heat Transfer Index (HTI) (seconds)
1	"g 4
2	≥ 7
3	≥ 10
4	≥ 18

Radiant heat protection – EU standard EN 407
Protection level	Heat Transfer Level, t ₂₄ (seconds)
1	≥ 7
2	≥ 20
3	≥ 50
4	≥ 95

Molten metal splashing in droplets – EU Standard EN 407
Protection level	Number of molten metal drops
1	≥ 10
2	≥ 15
3	≥ 25
4	≥ 35

Quantitative molten metal splashing – EU Standard EN 407
Protection level	gram of molten metal
1	30 g
2	60 g
3	120 g
4	200 g

Mechanical protection rating – EU standard EN 388	Level 1	Level 2	Level 3	Level 4
Abrasion resistance (number of cycles)	100	500	2000	8000
Cut resistance (index)	1.2	2.5	5.0	10.0
Tear resistance (N)	10	25	50	75
Puncture resistance (N)	20	60	100	150